We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black watertight wheeled hard case with cubed foam and padded divider set

Pelican Products, Inc.

Pelican Products 1620 Watertight Wheeled Hard Case with Cubed Foam and 1626AirDS Divider Set, Black

SKU CH-P7S1-NP1TE

A watertight wheeled hard case with cubed foam and a padded divider set, built from polypropylene with an IP67 rating for dust and water protection

  • Watertight IP67 seal guards gear from moisture and dust
  • Automatic purge valve equalises pressure for safe air travel
  • Wheeled 1620 case with cubed foam and 1626AirDS dividers organises kit
  • Polypropylene shell with ABS latches withstands -40 °F to 190 °F
  • Military-spec construction since 1976 protects against crushing impact

Protection and organisation

The Pelican 1620 wheeled hard case ships with cubed foam and a 1626AirDS padded divider set, giving photographers and field technicians a ready-to-use system for securing cameras, lenses and accessories. Its IP67 rating confirms dust-tight and waterproof performance for demanding environments.

Seals and temperature range

A polymer O-ring seal and a 3-micron hydrophobic non-woven purge vent maintain watertight integrity while equalising pressure during altitude changes. The polypropylene shell with ABS latches and stainless steel pins is rated from -40F to 190F, so the case stays sealed in extreme cold or heat.

Sustained field use

Military-grade construction meets US/NATO mil-spec certifications, and the double-throw latches hold tight after repeated drops and vibration. The 1.3 lbs polyurethane cubed foam and optional divider set continue to absorb shocks over long journeys, keeping sensitive equipment protected throughout extended deployments.

Highlights

  • Watertight IP67 seal guards gear from moisture and dust
  • Automatic purge valve equalises pressure for safe air travel
  • Wheeled 1620 case with cubed foam and 1626AirDS dividers organises kit
  • Polypropylene shell with ABS latches withstands -40 °F to 190 °F
  • Military-spec construction since 1976 protects against crushing impact

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 1626AirDS divider set inside the 1620 case, and what step is often missed?

Place the padded dividers into the cubed foam cavities, then press each divider firmly until the hook-and-loop strips engage fully — skipping this press leaves sections loose and gear unprotected.

What maintenance will the polymer O-ring seal and 3-micron purge vent need over time?

Wipe the O-ring with a lint-free cloth after salt-water exposure, apply a thin film of silicone grease annually, and clear vent debris with low-pressure air to keep the watertight seal reliable.

Which limit appears first during sustained use in a 190F environment?

The polypropylene body and ABS latches are rated to 190F, so prolonged exposure at that temperature will soften the shell before the foam or stainless-steel hardware reaches its limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.