We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel TV wall mount with tilt mechanism, 29 1/2 inches wide, 16 inches high, 5 1/2 inches deep, fused epoxy finish

Peerless

Peerless PT650 TV Wall Mount 39-75 in 150 lb

SKU CH-8BKS-DB74S

Holds 39 to 75 inch screens up to 150 lb with 15 degree upward and 5 degree downward tilt on a 600x400 VESA pattern

  • TypeLightweight, Push To Talk, Factory Mutual Approved
  • Holds screens up to 75 inches with 150 lb steel construction
  • Tilts down 5 degrees and up 15 degrees for glare-free viewing
  • Fits VESA 600x400 patterns on 39 to 75 inch displays
  • Horizontal adjustment centres the TV after mounting
  • Fused epoxy finish on 16 inch high steel frame

Universal Tilt TV Wall Mount 39-75 in

The Peerless PT650 supports flat-panel screens from 39 to 75 inches diagonal with a 150 lb load capacity. Its steel construction and fused epoxy finish suit residential and light commercial installations. The mount attaches directly to wall studs using included hardware.

Adjustable Tilt Range and VESA 600x400

The bracket provides 15 degrees upward and 5 degrees downward tilt for glare reduction. Horizontal adjustment allows fine centering after mounting. A fixed tilt lock secures the chosen angle. The VESA 600x400 pattern matches many large displays.

Stud Mounting With Included Hardware

Installation requires locating wall studs for the 29 1/2 inch wide plate. The 16 inch overall height and 5 1/2 inch depth keep the screen close to the wall. Misaligned stud spacing is the most common issue; verify center distances before drilling.

Highlights

  • Holds screens up to 75 inches with 150 lb steel construction
  • Tilts down 5 degrees and up 15 degrees for glare-free viewing
  • Fits VESA 600x400 patterns on 39 to 75 inch displays
  • Horizontal adjustment centres the TV after mounting
  • Fused epoxy finish on 16 inch high steel frame

Specifications

BrandPeerless
ModelPT650
TypeLightweight, Push To Talk, Factory Mutual Approved

Questions about this item

Will the steel mounting plate or tilt mechanism need periodic tightening or replacement?

The fused-epoxy finished steel construction and included mounting hardware are designed for permanent installation without scheduled maintenance.

What is the maximum tilt range before the mount hits its mechanical stop?

The mount allows 15 degrees upward and 5 degrees downward tilt, locking at either limit with the fixed tilt lock.

Does the mount generate any noise or heat when holding a 150 lb TV continuously?

As a passive steel bracket with no moving parts under load, it produces zero noise and zero heat during all-day use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.