We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal stud fastener kit with four toggler anchors and four Phillips screws

Peerless Industries, Inc.

Peerless Industries, Inc. ACC415 Metal Stud Fastener Kit mount

SKU CH-4HWZ-N220J MPN ACC415

Kit of four togglers and 1/4-20 x 2.5" Phillips screws for mounting Peerless wall brackets to 25 gauge or heavier metal studs

  • TypeMetal Stud Fastener Kits
  • SpecificationsFor mounting Peerless wall mounts to 25 gauge or heavier met
  • FeaturesMetal Stud Fastener Kits can be used to attach to a single s
  • Mounts securely to 25 gauge or heavier metal studs
  • Supports up to 35 lb on a single stud
  • Includes four Toggler anchors and four 2.5 inch Phillips screws
  • Designed for Peerless wall mounts that span two studs for heavier loads
  • Model ACC415 fastener kit for metal stud installations

Metal Stud Fastener Kit

The Peerless ACC415 kit provides the hardware needed to secure wall mounts to metal studs rated at 25 gauge or heavier. It includes four togglers and four 1/4-20 by 2.5-inch Phillips screws for a complete installation. This accessory is intended for installers mounting Peerless brackets in commercial or residential metal-framed walls.

Single-Stud Weight Limit

The fasteners support a single-stud attachment only when the combined weight of the mount and equipment stays at or below 35 lb. Loads heavier than 35 lb require a Peerless mount with a wall plate that spans two or more studs and is specified for that use. Builders needing to hang heavier displays on a single stud should look at a different mounting method.

35 lb Single-Stud Capacity

The decisive specification is the 35 lb maximum for single-stud mounting. If the total load exceeds this figure the kit cannot be used unless the Peerless model explicitly allows multi-stud fastening with these fasteners. Verify the mount’s weight and the stud configuration before purchasing.

Highlights

  • Mounts securely to 25 gauge or heavier metal studs
  • Supports up to 35 lb on a single stud
  • Includes four Toggler anchors and four 2.5 inch Phillips screws
  • Designed for Peerless wall mounts that span two studs for heavier loads
  • Model ACC415 fastener kit for metal stud installations

Specifications

BrandPeerless-AV
ModelACC415
TypeMetal Stud Fastener Kits
SpecificationsFor mounting Peerless wall mounts to 25 gauge or heavier metal studs
Package Contents:
4 x Toggler
4 x Phillips screw (1/4-20 x 2.5")
FeaturesMetal Stud Fastener Kits can be used to attach to a single stud only when weight of mount and equipment does not exceed 35 lb.
Metal stud fasteners can be used on double stud Peerless mounts only where specified.
See specific models for quantity needed and compatibility.
Can be used to attach loads greater than 35 lb only where specified for Peerless models that contain a wall plate which spans two or more studs.
Shipping weight0.18 kg
Package size230 × 175 × 45 mm

Questions about this item

How do I confirm the togglers are holding securely in 25 gauge metal studs after installation?

Tighten each Phillips screw until the toggler seats firmly against the stud; the mount should not shift when you apply light pressure.

What comes in the ACC415 kit and what must I supply myself?

The box includes four togglers and four 1/4-20 x 2.5" Phillips screws; you provide the drill, driver bit and the Peerless wall mount.

Which Peerless mounts can use the ACC415 fastener kit?

It fits Peerless wall mounts designed for metal studs, limited to 35 lb per single stud or higher loads only on models with a wall plate spanning two or more studs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.