Peerless Industries, Inc.
Peerless Industries, Inc. 3-010-03-B6 Pulley Block, Fibrous Rope, 3/16" Cable
A brass pulley block with a 3/4 in outside diameter and 9/32 in sheave depth lifts or pulls fibrous rope up to 3/16 in diameter using a fixed eye attachment
- TypeMasonry Tools
- Brass housing resists corrosion for long service life
- 3/16 in rope capacity suits light lifting tasks
- Fixed-eye attachment enables quick, secure rigging
- Single brass sheave with sleeve bearing runs smoothly
- 3/4 in sheave diameter reduces rope wear
Pulley Block for 3/16" Fibrous Rope
This brass pulley block accepts fibrous rope up to 3/16 in diameter and features a fixed-eye attachment for secure rigging. The single-groove brass sheave runs on a sleeve bearing and has a 3/4 in outside diameter. It is designed for lifting and pulling tasks where a compact, corrosion-resistant block is required. The unit is supplied new and ready for immediate use.
Replaces Worn or Undersized Blocks
Swap out a damaged pulley or one with a smaller sheave when rope wear or binding becomes an issue. The 3/4 in sheave diameter reduces bend radius stress on 3/16 in line compared to narrower blocks. Upgrade is worth it when the existing hardware shows groove deformation, bearing noise or corrosion that compromises safe operation. No working load limit is rated, so match the block to the application's safety factor.
Fits Directly into Existing Rigging
The fixed eye accepts a 9/32 in pin or shackle, allowing quick integration with current tackle. Brass housing and sheave resist marine and masonry environments without additional coating. Sleeve bearing requires periodic lubrication but eliminates ball-bearing contamination risk. Ensure rope type remains fibrous; wire rope is not compatible with this sheave profile.
Highlights
- Brass housing resists corrosion for long service life
- 3/16 in rope capacity suits light lifting tasks
- Fixed-eye attachment enables quick, secure rigging
- Single brass sheave with sleeve bearing runs smoothly
- 3/4 in sheave diameter reduces rope wear
Specifications
| Brand | Peerless |
|---|---|
| Type | Masonry Tools |
Questions about this item
What is the maximum cable diameter that fits the sheave?
The sheave accepts fibrous rope up to 3/16 in diameter with a 17/32 in inside diameter and 9/32 in depth.
How do you attach the block, and what step is often missed?
The fixed eye attaches directly to a hook or shackle; the step often missed is confirming the attachment inside diameter of 9/32 in matches your connector pin.
When should the brass sheave or sleeve bearing be replaced?
Replace the brass sheave or sleeve bearing when the groove shows visible wear, the rope binds, or the bearing develops excessive play.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
