Peerless
Peerless 6044032 Zinc Plated Chain 100 ft 670 lb
Zinc-plated steel chain coil provides 100 ft of corrosion-resistant barrier or tailgate use with a 670 lb rating, not for lifting
- Corrosion-resistant finish protects the chain in demanding conditions
- 100 ft length gives plenty of material for barriers or tailgates
- 670 lb working load suits low-tensile applications
- Welded carbon steel links deliver reliable durability
- Not rated for lifting — use only for non-lifting tasks
Ideal barrier chain for farm use
This Peerless zinc plated carbon steel chain is supplied in a 100 ft coil for use as a barrier or tailgate. It suits agricultural and ranch tasks where low tensile strength is acceptable. The corrosion resistant finish helps protect the steel in demanding outdoor conditions. It is not suitable for lifting applications.
Thermals noise and power draw
As a passive steel chain this product generates no heat and produces no noise during use. It draws no electrical power and has no moving parts that require cooling. Performance is unaffected by temperature in normal outdoor environments. Maintenance is limited to occasional inspection for wear or corrosion.
670 lb tensile strength limit
The chain is rated at 670 lb which determines whether it meets the load requirement for a specific barrier or tailgate task. Buyers who need a higher working load limit for lifting or heavy towing must select a different product. This specification is the single factor that decides if the chain is appropriate for the intended job. The 100 ft length and zinc plated finish support the use case but do not change the strength rating.
Highlights
- Corrosion-resistant finish protects the chain in demanding conditions
- 100 ft length gives plenty of material for barriers or tailgates
- 670 lb working load suits low-tensile applications
- Welded carbon steel links deliver reliable durability
- Not rated for lifting — use only for non-lifting tasks
Specifications
| Brand | Peerless |
|---|
Questions about this item
How do I install the Peerless 6044032 chain as a tailgate barrier without weakening the 670 lb working limit?
Secure each end to rated anchor points using hardware that matches or exceeds the chain's 670 lb rating; the step most people miss is using a grade-appropriate shackle or hook instead of wrapping the link directly over a sharp edge, which cuts the effective strength.
What maintenance does the zinc-plated finish need to keep its corrosion resistance over a 100 ft run?
Rinse off road salt, fertilizer or manure after each season, let the chain dry fully, then apply a light coat of non-tacky corrosion inhibitor; inspect every link for white rust or pitting before re-deploying.
At what point does the 670 lb low-tensile rating become the limiting factor during sustained tension?
The 670 lb working load limit is reached the moment static or dynamic tension exceeds that figure — there is no fatigue buffer, so any sustained pull above 670 lb risks permanent stretch or link failure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
