Peerless
Peerless 6024032 Twist Chain Carbon Steel 100 ft 670 lb
Carbon-steel twist-link machine chain, 100 ft, 670 lb working load limit, zinc-plated, 13 links per foot, welded construction, not for overhead lifting
- 670 lb working load limit for secure towing
- 100 ft continuous length covers long-distance runs
- 13 links per foot give consistent flexibility
- Zinc-plated carbon steel resists corrosion outdoors
- Welded twist links prevent snagging during use
Peerless Twist Chain 100 ft Carbon Steel
Peerless 6024032 is a 100 ft coil of welded carbon-steel twist chain with a 670 lb working-load limit. The zinc-plated finish resists corrosion during storage and outdoor use. Each foot weighs 0.44 lb and contains 13 links measuring 7/8 in by 3/8 in inside dimensions. The material thickness is 7/32 in and meets NACM standards.
Suits tie-down, binding and general utility tasks
This chain works for securing loads, creating barriers or fabricating custom assemblies where a 670 lb limit is adequate. It is not rated for overhead lifting, so riggers who need a certified lifting sling must choose a different product. Buyers who require end hooks or master links will have to add those separately. The coil arrives without any attached fittings.
670 lb working-load limit
The single figure that decides fit is the 670 lb working-load limit. If the application demands a higher capacity, this chain is not the correct choice. Verify the load requirement before ordering.
Highlights
- 670 lb working load limit for secure towing
- 100 ft continuous length covers long-distance runs
- 13 links per foot give consistent flexibility
- Zinc-plated carbon steel resists corrosion outdoors
- Welded twist links prevent snagging during use
Specifications
| Brand | PEERLESS CHAIN |
|---|
Questions about this item
What working load does the 670 lb WLL chain cap at for safe use?
The working load limit is 670 lb; this chain is not rated for overhead lifting and must only be used for pulling or conveying within that limit.
What are the link dimensions and overall length that determine fit?
Each link measures 7/8 in inside length by 3/8 in inside width with 7/32 in material thickness, and the reel provides 100 ft of welded carbon-steel chain.
How do I properly connect this hook-free twist chain for a secure pull?
Use rated connecting links or shackles that match the 4/0 trade size and 670 lb WLL; never weld or bend links, and inspect every connection before applying load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
