We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount power amplifier with front LED panel and rear twist-lock outputs

Peavey Electronics

Peavey IPR2 7500 2-Channel Power Amplifier with 32 DSP

SKU CH-75TT-RAHRS

Two-channel class D power amplifier delivering up to 4750 watts at 2 ohms with 32 built-in DSP presets

  • 4750 watts per channel at 2 ohms delivers high-output power for large venues
  • 3750 watts RMS per channel at 2 ohms ensures sustained clean performance under load
  • 32 built-in DSP presets provide ready-to-use speaker processing without external gear
  • Fourth-order Linkwitz-Riley crossovers on each channel enable precise frequency management
  • Class D topology with switch-mode supply reduces weight while maintaining audio resolution

Amplifier with 32 DSP channels

The Peavey IPR2 7500 is a two-channel class D power amplifier that integrates 32 channels of digital signal processing. It is built for installed sound systems, touring front-of-house racks and stage monitoring where onboard DSP replaces external processors.

Power ratings across three impedances

The amplifier delivers 4750 watts per channel at 2 ohms, 2800 watts per channel at 4 ohms and 1550 watts per channel at 8 ohms. RMS output is 3750 watts per channel at 2 ohms, 2022 watts at 4 ohms and 1250 watts at 8 ohms. Output connectors are four-pole twist-lock types.

4500-watt total rating decides fit

The model is specified at 4500 watts overall, a figure that determines whether the unit matches the venue's power budget and speaker load. Buyers who need more total watts or a different channel count must select another amplifier.

Highlights

  • 4750 watts per channel at 2 ohms delivers high-output power for large venues
  • 3750 watts RMS per channel at 2 ohms ensures sustained clean performance under load
  • 32 built-in DSP presets provide ready-to-use speaker processing without external gear
  • Fourth-order Linkwitz-Riley crossovers on each channel enable precise frequency management
  • Class D topology with switch-mode supply reduces weight while maintaining audio resolution

Specifications

No published specifications for this item yet.

Questions about this item

Should I run the IPR2 7500 at 2 ohms, 4 ohms or 8 ohms for my speakers?

Match the amplifier to your speaker impedance: 4750 watts per channel at 2 ohms, 2800 watts at 4 ohms, or 1550 watts at 8 ohms.

What does the 4500 W rating on the box actually deliver per channel in a live system?

Continuous RMS power is 3750 watts per channel at 2 ohms, 2022 watts at 4 ohms and 1250 watts at 8 ohms.

What connectors does the IPR2 7500 use for speaker outputs and what do they limit?

Four-pole twist-lock output connectors secure each channel; they carry the full rated current up to the 2-ohm limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.