Peakpick D19PRO 20 PSI Electric Pump 400 L/min 12 Pack
Rechargeable battery-powered pump inflates SUPs to 20 PSI with dual-stage flow up to 400 L/min
- TypeGray
- MaterialPlastic
- Maximum GPM400 liters_per_minute
- Compatibility/FitmentD19PRO, Peakpick
- Frequency Hznot_applicable
- Current TypeBattery Powered, Rechargeable, lithium_ion, aaaa, battery
- Dual-stage inflation reaches 20 PSI with 400 L/min first-stage speed
- Rechargeable lithium-ion battery inflates two 10.5 ft boards to 15 PSI per charge
- Auto-stop pressure sensor prevents over-inflation in Auto Low High modes
- Active cooling system allows continuous operation without overheating
- Compact 7.0" x 6.2" x 3.3" design with handle fits in backpack
Battery-powered SUP pump
The Peakpick D19PRO is a rechargeable, battery-powered electric pump designed for stand-up paddle boards and other inflatables. It delivers a dual-stage flow of up to 400 liters per minute at low pressure and 100 liters per minute at high pressure, reaching a maximum of 20 PSI. The unit weighs 2.5 lb and measures 7.0 by 6.2 by 3.3 inches, with a built-in handle for easy transport. A 12-pack provides multiple units for clubs, rental fleets or large families.
Suits portable inflation needs
This pump suits paddlers, kayakers and campers who need to inflate boards, wings, tents or boats away from mains power. The lithium-ion battery can inflate two 10.5 ft SUPs to 15 PSI on a single charge. It is not for users who require continuous all-day operation without recharging, or for applications needing pressure beyond 20 PSI. Builders who need a wired compressor for workshop use should look at a different class of equipment.
Dual-stage 20 PSI limit
The decisive specification is the dual-stage design capped at 20 PSI, with the second stage delivering 100 liters per minute for final high-pressure topping. This ceiling determines whether the pump can meet the pressure rating of your specific inflatable; craft requiring higher pressure cannot be fully inflated by this unit.
Highlights
- Dual-stage inflation reaches 20 PSI with 400 L/min first-stage speed
- Rechargeable lithium-ion battery inflates two 10.5 ft boards to 15 PSI per charge
- Auto-stop pressure sensor prevents over-inflation in Auto Low High modes
- Active cooling system allows continuous operation without overheating
- Compact 7.0" x 6.2" x 3.3" design with handle fits in backpack
Specifications
| Type | Gray |
|---|---|
| Material | Plastic |
| Maximum GPM | 400 liters_per_minute |
| Compatibility/Fitment | D19PRO, Peakpick |
| Frequency Hz | not_applicable |
| Current Type | Battery Powered, Rechargeable, lithium_ion, aaaa, battery |
| Phase | Gray |
| Port Size | Type-C |
| Housing Material | Plastic |
| Impeller Material | Plastic |
| Size/Dimensions | 17.1958 cm x 18.288 cm x 19.812 cm |
| Item Count | 12 pack |
| Commercial/Residential | sup pump, air hose, air nozzles, charging cable, user manual |
| Parts | two year warranty |
| Labor | two year warranty |
| Brand | Peakpick |
| Model | D19PRO |
| Part Number | D19PRO |
Questions about this item
What adapters come with the D19PRO pump so I can connect it to my board?
The kit includes seven valve adapters that fit SUP boards, kayaks, wind wings, inflatable tents, boats and swimming rings.
Will the pump run off my car's 12 V socket while I'm at the beach?
The D19PRO uses its built-in rechargeable lithium-ion battery; it does not have a 12 V vehicle input.
How do I know the pump has reached the pressure I set on the LED display?
The pump stops automatically when the target pressure is reached and the digital display shows the final PSI reading.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



