PCMART
PCMART Toughpower GX2 600W 80+ Gold Server Power Supply
Delivers 600W with 80 Plus Gold efficiency up to 90% and a single 12V rail for stable GPU power
- 80 Plus Gold efficiency up to 90 percent
- 600W continuous power on a single 12V rail
- 120mm dynamic-bearing fan for quiet cooling
- Non-modular cable set includes six SATA connectors
- Over-power, over-voltage, under-voltage and short-circuit protection
Server Power Supply for GPU Builds
This PCMART Toughpower GX2 unit delivers 600W of continuous power from a single +12V rail, making it suitable for workstations or servers that require stable output for graphics cards. The non-modular cable set includes two PCI-E 6+2 pin connectors alongside six SATA and three peripheral plugs. It meets ATX 12V 2.4 and EPS 2.92 specifications for broad compatibility.
Thermals Noise and Efficiency
An ultra-quiet 120mm dynamic bearing fan handles cooling while keeping acoustic output low during typical workloads. The 80 Plus Gold certification confirms up to 90% efficiency at relevant loads, reducing waste heat and supporting modern C6 or C7 sleep states. High-quality capacitors and low ripple noise contribute to steady voltage delivery for sensitive components.
Sustained Load Behaviour
The single +12V rail design with DC-to-DC conversion maintains consistent voltage under prolonged demand rather than only in short bursts. Industry-grade protections including over-power, over-voltage, under-voltage and short-circuit safeguards activate automatically if limits are exceeded. This combination allows the power supply to support continuous operation in server environments without unexpected shutdowns.
Highlights
- 80 Plus Gold efficiency up to 90 percent
- 600W continuous power on a single 12V rail
- 120mm dynamic-bearing fan for quiet cooling
- Non-modular cable set includes six SATA connectors
- Over-power, over-voltage, under-voltage and short-circuit protection
Specifications
No published specifications for this item yet.
Questions about this item
How do I fit the non-modular 24-pin main and 4+4-pin CPU cables into a tight server case without kinking them?
Route the fixed 24-pin and 4+4-pin leads behind the motherboard tray first, then pull only the slack needed toward each header; sharp bends near the connector strain the pins and are the most common install error.
Which parts of this 600 W unit are likely to wear out first and need replacement?
The 120 mm dynamic-bearing fan and the electrolytic capacitors age with heat cycles; expect fan noise or capacitor degradation after several years of continuous operation.
At what point does the single +12 V rail hit its limit during a sustained heavy GPU load?
The single +12 V rail delivers the full 600 W continuously; sustained draws above that trigger over-power protection and shut the unit down.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



