Pass & Seymour
Pass & Seymour L620CGCM Turnlok Connector L6-20R 20A 250V
A 20 A, 250 V AC locking connector with Turnlok design for secure three-wire power connections
- TypeTurnlok
- Length2.400
- ColorBlack/White
- Weight0.38
- Locking mechanism secures 20 A 250 V connections
- NEMA L6-20R configuration fits three-wire 250 V circuits
- Nylon housing resists chemicals and impact
- Accepts cable diameters from .385 in to .69 in
- Federal Specification grade meets rigorous standards
Connector L6-20R 20 A 250 V
The Pass & Seymour L620CGCM Turnlok connector provides a locking straight receptacle rated for 20 A at 250 V AC. It uses a 2-pole, 3-wire NEMA L6-20R configuration with brass contacts and a nylon housing in black and white. The device meets federal specification grade and accepts cable diameters from 0.385 in to 0.69 in.
Suited for three-phase locking power connections
This connector fits equipment that requires a grounded L6-20R receptacle with chemical and impact resistant housing. It is not intended for applications needing an IP-rated enclosure or a shrouded body. Installers who require a different NEMA configuration or a higher current rating should select another part.
Deciding specification NEMA L6-20R 20 A 250 V
The NEMA L6-20R receptacle configuration combined with a 20 A, 250 V AC rating determines whether this connector matches the inlet on your equipment. Verify the plug on your device carries the same L6-20P designation before ordering.
Highlights
- Locking mechanism secures 20 A 250 V connections
- NEMA L6-20R configuration fits three-wire 250 V circuits
- Nylon housing resists chemicals and impact
- Accepts cable diameters from .385 in to .69 in
- Federal Specification grade meets rigorous standards
Specifications
| Brand | Pass & Seymour |
|---|---|
| Model | L620CGCM |
| Type | Turnlok |
| Length | 2.400 |
| Color | Black/White |
| Weight | 0.38 |
Questions about this item
What cable diameter range does the L6-20R Turnlok connector accept?
The connector fits cables from 0.385 in to 0.69 in diameter.
Does the 20 A 250 V locking receptacle work with existing straight-blade L6-20 plugs?
No, the Turnlok mechanism only mates with matching NEMA L6-20R locking plugs.
How can I confirm the connector is properly seated after wiring?
The locking collar clicks into place and the plug cannot be pulled straight out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



