Parkworld
Parkworld 62893 NEMA 14-50P to L14-30R 30A 250V straight blade plug
A compact one-piece adapter connects a NEMA L14-30 plug to a 14-50 240 V outlet using 10 AWG copper conductors rated for 30 A
- Voltage (Volts)125/250
- Maximum Amperage (Amps)30
- NEMA Configuration14-50P to L14-30R
- ColorYellow
- MaterialPVC
- TypePlug Adapters
- Compact one-piece design connects L14-30 plug to 14-50 outlet
- Electroplated copper terminals resist surface oxidation effectively
- 10 AWG copper conductors support maximum 30 amp loading
- 125/250 volt rating handles RV and generator power needs
- Yellow PVC housing identifies 4-pole 30 amp straight blade adapter
RV power adapter for generator hookups
This compact adapter connects a NEMA L14-30 twist-lock plug to a 50-amp RV-style NEMA 14-50 outlet. It lets owners of L14-30 equipment draw power from standard RV pedestals or dryer receptacles. The one-piece moulded design keeps the connection short and secure for temporary outdoor use.
Passive connector runs cool and silent
With no active components the adapter generates no heat, noise or power draw of its own. Internal 10 AWG copper conductors are rated for the full 30-amp load at 125/250 volts. Electroplated terminals resist oxidation so resistance stays low during extended sessions.
Yellow PVC shell resists weather and abuse
The rugged moulded housing protects the four-pole wiring from moisture, dust and impact on job sites or campsites. A straight-blade male end plugs directly into the 14-50 receptacle while the locking female end accepts an L14-30 cord. Buyers needing a 50-amp pass-through or a different locking configuration will need a separate adapter.
Highlights
- Compact one-piece design connects L14-30 plug to 14-50 outlet
- Electroplated copper terminals resist surface oxidation effectively
- 10 AWG copper conductors support maximum 30 amp loading
- 125/250 volt rating handles RV and generator power needs
- Yellow PVC housing identifies 4-pole 30 amp straight blade adapter
Specifications
| Brand | Parkworld |
|---|---|
| Model | NEMA 14-50P to L14-30R |
| Voltage (Volts) | 125/250 |
| Maximum Amperage (Amps) | 30 |
| NEMA Configuration | 14-50P to L14-30R |
| Color | Yellow |
| Material | PVC |
| Type | Plug Adapters |
| Amps | 30 |
| Number of Poles | 4 |
Questions about this item
How do I connect the 14-50P plug and L14-30R receptacle correctly?
Insert the 14-50P male end fully into the 50 amp 125/250V outlet until seated, then push the L14-30P plug into the L14-30R female end and twist clockwise to lock the four-pole connection.
What part of the adapter will need replacement first with regular use?
The 10AWG copper conductors and electroplated terminals resist oxidation, but the yellow PVC housing and twist-lock latch can wear from repeated mating cycles and UV exposure.
At what load does the adapter reach its thermal limit during continuous operation?
The 10AWG copper wire and 30 amp rating set the sustained limit; drawing the full 30 amps at 250 volts continuously will produce the highest allowable temperature rise.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



