Parker
Parker R42E195M 650 psi ODF hvac control
Normally closed refrigeration solenoid valve with 5/8 in ODF sweat connection, 19/32 in port, and 650 psi safe working pressure
- Normally closed design prevents refrigerant loss during power failure
- 650 psi safe working pressure handles high-demand refrigeration circuits
- 19/32 inch port and 5/8 inch ODF sweat connection simplify installation
- Brass body with synthetic coating resists corrosion in harsh environments
- CE, CSA and UL certifications confirm compliance with safety standards
Parker R42E195M Solenoid Valve
This Parker R42E195M is a normally closed refrigeration solenoid valve rated for 650 psi safe working pressure. It is designed for HVAC and refrigeration systems requiring reliable shut-off of refrigerant flow in commercial or industrial installations.
Brass Body with ODF Sweat Connections
The valve body is constructed from brass with a synthetic coated metal finish for corrosion resistance. It features ODF sweat connections sized for 5/8 inch tubing with a 19/32 inch port, requiring brazing during installation for a permanent, leak-free joint.
CE CSA UL Listed for Compliance
The component carries CE, CSA and UL listings, confirming adherence to recognised safety standards. Verify that your system operating pressure does not exceed 650 psi and that the 19/32 inch port matches your piping layout before ordering. This valve is not suited for applications requiring normally open operation or flare-type fittings.
Highlights
- Normally closed design prevents refrigerant loss during power failure
- 650 psi safe working pressure handles high-demand refrigeration circuits
- 19/32 inch port and 5/8 inch ODF sweat connection simplify installation
- Brass body with synthetic coating resists corrosion in harsh environments
- CE, CSA and UL certifications confirm compliance with safety standards
Specifications
| Brand | PARKER |
|---|
Questions about this item
What is the safe working pressure rating for this Parker R42E195M solenoid valve?
The valve has a safe working pressure of 650 psi for refrigerant systems.
What pipe size do the ODF connections on this valve accept?
The sweat connections are sized for 5/8 inch ODF copper tubing.
How is this normally-closed solenoid valve installed and energised?
Braze the ODF ends into the refrigerant line, then apply the rated coil voltage to open the valve against spring pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
