Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941901BTC
In stock
Parker
Parker 6579 60 14WP2 90 Elbow White PK10
Pack of ten push-fit 90-degree elbow fittings joining 3/8 in tube to 1/4 in NPTF thread
- TypeOther
- Push-to-connect design speeds installation without tools
- Pre-applied thread sealant reduces leak risk on NPTF threads
- Bio-based nylon body resists corrosion in vacuum lines
- 230 psi rating handles demanding pressure applications
- White finish matches clean-room and lab aesthetics
Parker 90° Elbow Vacuum Fitting
This Parker push-fit elbow connects 3/8 inch tubing to a 1/4 inch NPTF port for vacuum applications. The white bio-based nylon body includes pre-applied thread sealant and suits new installations or maintenance work. Rated for 230 psi and 200 degrees F, it is sold as a pack of ten pieces.
Who Should Use This Elbow
Plumbers and technicians needing a white push-to-connect elbow for vacuum lines with 3/8 inch tube and 1/4 inch NPTF threads will find this fitting suitable. Buyers requiring a different tube diameter, thread type, or a straight connector instead of a 90 degree elbow should look at alternative fittings.
90 Degree Push-Fit Vacuum Elbow
The defining specification is the 90 degree push-to-connect elbow configuration joining 3/8 inch tube OD to 1/4 inch NPTF threads for vacuum service. This single geometry and connection combination determines whether the part matches the system layout.
Highlights
- Push-to-connect design speeds installation without tools
- Pre-applied thread sealant reduces leak risk on NPTF threads
- Bio-based nylon body resists corrosion in vacuum lines
- 230 psi rating handles demanding pressure applications
- White finish matches clean-room and lab aesthetics
Specifications
| Brand | PARKER |
|---|---|
| Type | Other |
Questions about this item
Does the pack of ten 90-degree elbows include thread sealant or must I buy it separately?
The listing states that pre-applied thread sealant is not included, so you will need to supply your own sealant for the NPTF connections.
Should I choose this fitting for 3/8-inch tubing and 1/4-inch NPTF threads or is another size available?
This model is built for 3/8-inch tube outer diameter on the push-to-connect side and 1/4-inch NPTF on the threaded side; no other sizes are offered in this pack.
Will the 230 psi pressure rating hold up on a typical residential vacuum line?
The fitting is rated to 230 psi maximum operating pressure, well above normal residential vacuum pressures, so it will handle the job comfortably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
