We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Parker

Parker 6509 62 22WP2 90 Swivel Elbow White

SKU CH-H8KV-NRYN2

White push-fit swivel elbow connects 1/2 in tube to 1/2 in NPTF thread, rated to 230 psi and 200°F

  • TypeOther
  • Swivel design allows flexible tube routing
  • Push-to-connect fitting enables tool-free installation
  • Bio-based nylon construction resists corrosion
  • 230 psi rating handles demanding vacuum applications
  • Pre-applied thread sealant ensures leak-free NPTF connection

Parker 6509 62 22WP2 90 Swivel Elbow

This Parker 6509 62 22WP2 90 swivel elbow is a push-fit fitting designed for vacuum applications. It connects a 1/2 inch tube outer diameter on side A to a 1/2 inch NPTF thread on side B. The body is moulded from white bio-based nylon. It suits installers who need a compact, corrosion-resistant elbow for low-pressure vacuum lines.

Pre-applied thread sealant and 90-degree swivel

The fitting arrives with thread sealant already applied to the NPTF end, removing the need for separate tape or paste during assembly. Its 90-degree swivel action allows the connected tube to be oriented after the thread is tightened, simplifying routing in tight cavities. Maximum operating limits are 230 psi and 200 degrees F, with an overall length of 2 inches.

Installers needing push-to-connect vacuum elbows

This part suits technicians who want a tool-free tube connection on one side and a sealed pipe thread on the other. It is not for systems exceeding the stated pressure or temperature ratings. Buyers who require a straight connector, a different tube diameter, or a metal-bodied fitting should look at other configurations.

Highlights

  • Swivel design allows flexible tube routing
  • Push-to-connect fitting enables tool-free installation
  • Bio-based nylon construction resists corrosion
  • 230 psi rating handles demanding vacuum applications
  • Pre-applied thread sealant ensures leak-free NPTF connection

Specifications

BrandPARKER
TypeOther

Questions about this item

Will the bio-based nylon elbow need periodic replacement due to chemical exposure?

The fitting is moulded from bio-based nylon and carries a California Proposition 65 warning for chemicals linked to cancer and reproductive harm; inspect regularly and replace if cracking or discoloration appears.

What pressure limit will be reached first during continuous vacuum service?

The maximum operating pressure is rated at 230 psi, so sustained vacuum cycles must stay below this threshold to avoid exceeding the design limit.

How much heat can the push-fit elbow handle when running all day?

It is rated for a maximum operating temperature of 200 °F, so continuous use should remain under this figure to prevent material degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.