We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Parker

Parker 6509 60 18WP2 90 Swivel Elbow White PK10

SKU CH-S2WM-MVN6F

A white push-fit elbow connects 3/8 inch tubing to 3/8 inch NPTF threads with pre-applied sealant for vacuum use up to 230 psi and 200 degrees Fahrenheit

  • TypeOther
  • Swivel elbow enables flexible plumbing layouts
  • Push-to-connect design allows quick tool-free installation
  • White finish suits clean bathroom aesthetics
  • Rated for 230 psi maximum operating pressure
  • Withstands temperatures up to 200 degrees Fahrenheit

6509 90 Swivel Elbow Pack

The Parker 6509 60 18WP2 90 swivel elbow is a push-fit fitting designed for vacuum applications. It connects a 3/8 in tube to a 3/8 in NPTF threaded port. The pack contains 10 white fittings made from bio-based nylon. It is intended for plumbing or pneumatic systems requiring a right-angle connection.

Pre-Applied Sealant and Swivel Action

Each elbow includes pre-applied thread sealant on the NPTF side to simplify installation and reduce leak paths. The swivel design allows the fitting body to rotate after tightening, helping align the tube without stressing the connection. The bio-based nylon body resists corrosion and is rated for 230 psi at 200 degrees F.

Installers Needing 3/8 Inch Vacuum Elbows

This pack suits technicians assembling vacuum lines or low-pressure pneumatic circuits with 3/8 in tubing and NPTF ports. Buyers who need a different thread type, a straight connector, or a metal-bodied fitting for higher temperatures should look at other products. The California Proposition 65 warnings apply to this item.

Highlights

  • Swivel elbow enables flexible plumbing layouts
  • Push-to-connect design allows quick tool-free installation
  • White finish suits clean bathroom aesthetics
  • Rated for 230 psi maximum operating pressure
  • Withstands temperatures up to 200 degrees Fahrenheit

Specifications

BrandPARKER
TypeOther

Questions about this item

Will the push-to-connect seal on the 3/8 in tube side need periodic replacement?

The bio-based nylon fitting uses a push-to-connect design rated for 230 psi and 200 Degrees F; inspect the seal during routine system checks and replace if leakage appears.

What pressure limit is reached first during continuous vacuum operation?

The maximum operating pressure is 230 psi, so sustained vacuum cycles must stay below this rating to avoid fitting failure.

Does the white nylon body run hot or transmit vibration when used all day?

At 200 Degrees F maximum temperature the material remains stable; the push-fit and NPTF connections do not generate heat or noise under normal flow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.