Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00931541BTC
In stock
Parker
Parker 6509 56 11WP2 90 Swivel Elbow White PK10
White 90-degree push-fit elbow with 1/4 in tube and 1/8 in NPTF ends, rated 230 psi at 200 °F, pack of 10
- TypeOther
- Swivel action simplifies routing in tight spaces
- Push-to-connect design speeds installation without tools
- Pre-applied sealant ensures leak-free NPTF threads
- Bio-based nylon resists corrosion up to 230 psi
- Withstands 200 °F for demanding vacuum lines
Parker 6509 Swivel Elbow Pack
This Parker 6509 swivel elbow pack contains ten white push-fit fittings for vacuum applications. Each elbow connects a quarter-inch tube to a one-eighth-inch NPTF thread with a ninety-degree turn. The bio-based nylon body includes pre-applied thread sealant for quicker assembly.
Suits Vacuum Lines and Tight Spaces
The ninety-degree swivel suits installers routing quarter-inch tubing in confined vacuum systems where a straight connector would not fit. Buyers needing a different tube diameter, a straight-through fitting, or a metal body should look at other fitting types.
Handles 230 PSI at 200 Degrees F
Rated for 230 psi maximum operating pressure and 200 degrees Fahrenheit, the elbow handles typical vacuum and low-pressure pneumatic lines with headroom to spare. It runs out of headroom in high-pressure hydraulic circuits or sustained temperatures above the rated limit.
Highlights
- Swivel action simplifies routing in tight spaces
- Push-to-connect design speeds installation without tools
- Pre-applied sealant ensures leak-free NPTF threads
- Bio-based nylon resists corrosion up to 230 psi
- Withstands 200 °F for demanding vacuum lines
Specifications
| Brand | PARKER |
|---|---|
| Type | Other |
Questions about this item
What size tubing do I need for the push-to-connect side of this 6509 90 swivel elbow?
The push-to-connect port accepts 1/4 inch outer-diameter tubing for a secure vacuum fit.
Will the 1/8 inch NPTF threads on this elbow seal directly into my existing brass fittings?
Yes, the 1/8 inch NPTF threads mate with standard NPTF ports; the pre-applied sealant is not included so apply your own thread tape or compound.
How can I confirm the fitting is holding pressure after installation?
Pressurise the line up to 230 psi and inspect the push-to-connect and threaded joints for leaks; the fitting is rated for 200 degrees F maximum operating temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
