Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00947679BTC
In stock
Parker
Parker 6505 60 14WP2 Push-Fit Adapter Fitting 3/8 in Tube Bio-Based Nylon
Connects 3/8 inch tube to 1/4 inch male pipe thread using bio-based nylon rated to 230 psi and 200 degrees Fahrenheit
- TypeOther
- Push-to-connect design speeds installation with 3/8 in tube
- Male NPTF thread fits 1/4 in pipe connections
- Bio-based nylon construction resists chemicals up to 230 psi
- Withstands 200 °F for demanding vacuum applications
- Pre-applied sealant option simplifies leak-free assembly
3/8 in Push-Fit Adapter Fitting
The Parker 6505 60 14WP2 is a push-fit adapter fitting designed for vacuum applications. It connects a 3/8 in tube outer diameter to a 1/4 in MNPTF thread using bio-based nylon construction. The white fitting includes pre-applied thread sealant for simplified installation. It suits fluid-handling systems requiring a compact, corrosion-resistant connection.
Suits vacuum lines needing 3/8 to 1/4 NPT transition
This adapter fits builders joining 3/8 in push-to-connect tubing to a 1/4 in male pipe thread in vacuum service. It is not for buyers needing a different tube size, thread type, or higher pressure rating than 230 psi. Installers requiring a metal body or a fitting without Proposition 65 listed chemicals should look elsewhere.
Handles 230 psi at 200 Degrees F
The fitting operates up to 230 psi maximum pressure and 200 Degrees F maximum temperature. Its 7/8 in overall length provides a short insertion depth for tight assemblies. Headroom exists for typical vacuum and low-pressure fluid lines within these limits. It runs out when system pressure or temperature exceeds the rated maximums.
Highlights
- Push-to-connect design speeds installation with 3/8 in tube
- Male NPTF thread fits 1/4 in pipe connections
- Bio-based nylon construction resists chemicals up to 230 psi
- Withstands 200 °F for demanding vacuum applications
- Pre-applied sealant option simplifies leak-free assembly
Specifications
| Brand | PARKER |
|---|---|
| Type | Other |
Questions about this item
What size tubing must I already have to connect to the 3/8 in push-to-connect side?
You need 3/8 inch outer-diameter tubing that is compatible with push-to-connect fittings.
Will the 1/4 in MNPTF thread mate with my existing 1/4 NPT female port?
Yes, the 1/4 inch MNPTF thread is designed to seal in a standard 1/4 NPT female thread when tightened with thread sealant.
How can I confirm the fitting is holding pressure after installation?
Pressurise the system up to 230 psi and check the push-to-connect and threaded joints for leaks; the fitting is rated for 200 °F maximum operating temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
