Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939809BTC
In stock
Parker
Parker 6316 62 00WP2 Push-Fit Union Fitting 1/2 in Bio-Based Nylon
Push-fit union fitting joins two 1/2 in tubes with bio-based nylon rated to 230 psi and 200 Degrees F
- TypeOther
- Push-fit design enables tool-free installation on 1/2 in tubing
- Bio-based nylon construction reduces petroleum-based material content
- Rated for 230 psi maximum operating pressure
- Withstands temperatures up to 200 degrees Fahrenheit
- Compact 2 1/4 in overall length fits tight spaces
Parker Push-Fit Union Fitting 1/2 in
This Parker 6316 push-fit union fitting joins two 1/2 inch tubes using a tool-free push-to-connect design on both ends. The body is moulded from white bio-based nylon and rated for 230 psi at up to 200 degrees Fahrenheit. It measures 2 1/4 inches in overall length and ships without pre-applied thread sealant.
Replacing Compression or Barbed Unions
The push-to-connect mechanism removes the need for wrenches, ferrules or clamps when joining 1/2 inch tubing in vacuum or pressure lines. The upgrade is worthwhile when faster assembly, easier disassembly for maintenance, or a lighter-weight nylon fitting is preferred over metal compression or barbed alternatives.
Installers Needing Quick 1/2 Inch Tube Connections
Plumbers, maintenance technicians and OEM assemblers who work with 1/2 inch tubing in water, air or vacuum systems will benefit from the tool-free installation and bio-based nylon construction. Buyers requiring metal fittings, higher temperature ratings, different tube sizes or integrated thread sealant should consider other fitting types.
Highlights
- Push-fit design enables tool-free installation on 1/2 in tubing
- Bio-based nylon construction reduces petroleum-based material content
- Rated for 230 psi maximum operating pressure
- Withstands temperatures up to 200 degrees Fahrenheit
- Compact 2 1/4 in overall length fits tight spaces
Specifications
| Brand | PARKER |
|---|---|
| Type | Other |
Questions about this item
What tube outer diameter must the pipe have for the Parker 6316 push-fit union fitting?
The fitting accepts 1/2 in outer-diameter tube on both ends, so the pipe must match that size for a secure push-to-connect seal.
What is the installation step people often miss when connecting the Parker 6316 union?
Push each tube fully into the fitting until it bottoms out; a partial insert will not engage the internal collet and can leak under pressure.
When should the Parker 6316 bio-based nylon union be replaced in a hot-water line?
Replace it if the fitting sees temperatures above 200 °F or pressures above 230 psi, or if the white nylon body shows cracking or discoloration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
