Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939809BTC
In stock
Parker
Parker 6316 56 00WP2 Push-Fit Union Fitting 1/4 in Bio-Based Nylon
Connects 1/4-inch tubes with push-fit ends, rated to 230 psi and 200 degrees F in bio-based nylon
- TypeOther
- Push-to-connect design enables tool-free installation
- Bio-based nylon construction reduces environmental impact
- Rated for 230 psi maximum operating pressure
- Withstands temperatures up to 200 degrees Fahrenheit
- Compact 1 3/16 inch overall length fits tight spaces
Parker 6316 56 00WP2 Fitting
The Parker 6316 56 00WP2 is a push-fit union fitting designed to join two sections of 1/4 inch tubing in fluid handling systems. It is intended for installers and maintenance personnel who need a quick, tool-free connection method for vacuum applications.
Bio-Based Nylon Construction
The fitting body is moulded from white bio-based nylon and accepts 1/4 inch outer diameter tubing on both ends via push-to-connect ports. It carries a maximum operating pressure of 230 psi and a maximum operating temperature of 200 degrees F, with an overall length of 1 3/16 inches. No thread sealant is included or pre-applied.
Suits Simple Inline Repairs
This union suits users joining equal-sized tubing in low-pressure vacuum lines where a compact, corrosion-resistant coupler is required. It does not suit applications needing threaded connections, different tube diameters, higher temperature ratings or integrated sealing compounds.
Highlights
- Push-to-connect design enables tool-free installation
- Bio-based nylon construction reduces environmental impact
- Rated for 230 psi maximum operating pressure
- Withstands temperatures up to 200 degrees Fahrenheit
- Compact 1 3/16 inch overall length fits tight spaces
Specifications
| Brand | PARKER |
|---|---|
| Type | Other |
Questions about this item
Will the 230 psi rating hold without creep during continuous duty?
The fitting is rated for a maximum operating pressure of 230 psi, so it is designed to maintain that pressure under sustained use.
Does the bio-based nylon soften or leak when run at the 200 °F limit all day?
The maximum operating temperature is 200 °F; the material is specified for that temperature during continuous operation.
Do I need a 1/4 in tube with a specific outer-diameter tolerance for the push-to-connect ends to seal?
Both sides accept 1/4 in outer-diameter tubing with a push-to-connect connection, so the tube must match that size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
