Parker
Parker 6306 White Union 3/8 in TubexTube PK10
White push-fit union joins two 3/8 in tubes for vacuum lines up to 230 psi and 200 °F
- Push-fit design enables tool-free installation
- Connects two 3/8 in tubes with a secure union
- Bio-based nylon construction resists corrosion and chemicals
- Rated for 230 psi at 200 Degrees F operating limits
- Pack of 10 fittings covers multiple connection points
Parker 6306 Union for 3/8 in Tubing
The Parker 6306 white union joins two sections of 3/8 in outer-diameter tubing with push-to-connect ends on both sides. It is made from bio-based nylon and rated for 230 psi at up to 200 degrees F. The pack contains 10 fittings for vacuum or fluid-transfer systems.
Sustained pressure and temperature performance
Under continuous load the fitting holds its 230 psi rating through the full 200 degree F range without leaking or deforming. The bio-based nylon body resists creep so the seal remains stable during long duty cycles rather than relaxing after a short pressure spike.
Compatibility checks before ordering
Verify that your tubing has a 3/8 in outer diameter and is compatible with push-to-connect fittings. Confirm the system pressure never exceeds 230 psi and the media temperature stays at or below 200 degrees F. Ensure the 1 21/32 in overall length fits the available space. Buyers needing a threaded connection or a different tube size cannot use this union.
Highlights
- Push-fit design enables tool-free installation
- Connects two 3/8 in tubes with a secure union
- Bio-based nylon construction resists corrosion and chemicals
- Rated for 230 psi at 200 Degrees F operating limits
- Pack of 10 fittings covers multiple connection points
Specifications
| Brand | PARKER |
|---|
Questions about this item
Does the 230 psi pressure rating hold steady when the fitting runs at the 200 °F maximum temperature all day?
The fitting is rated for 230 psi maximum operating pressure and 200 °F maximum operating temperature; both limits apply simultaneously for continuous service.
What tubing must I already have on hand for the 3/8 in push-to-connect ends to seal properly?
You need 3/8 in outer-diameter tubing compatible with push-to-connect fittings; the union accepts the same size on both sides.
Will the white bio-based nylon body resist cracking if I keep it alongside older brass fittings in the same plumbing run?
The bio-based nylon construction is chemically compatible with brass and copper, so it can remain in the same system without galvanic or stress-corrosion concerns.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



