We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White nylon push-fit tee fitting with 3/8 and 1/4 inch tube connections

Parker

Parker 6304 60 56WP2 Push-Fit Tee Fitting

SKU CH-B5HG-DZ8Z9

Push-fit tee fitting joins 3/8 in and 1/4 in tubing for carbon dioxide or potable water systems in white nylon

  • Push-to-connect design speeds installation without tools
  • Three-port tee splits 3/8 in and 1/4 in tubing runs
  • Nylon body resists corrosion in potable-water systems
  • Suitable for carbon-dioxide and drinking-water applications
  • White colour aids quick visual identification in plumbing layouts

Parker 6304 Push-Fit Tee Fitting

The Parker 6304 is a white nylon tee fitting designed for push-to-connect installation. It joins three tubes in a T configuration using 3/8 inch, 1/4 inch, and 3/8 inch outer diameters. The fitting handles carbon dioxide and potable water applications without requiring separate thread sealant. Its push-fit ends allow quick assembly in plumbing or pneumatic systems.

Suitable for potable water

This fitting suits installers joining 3/8 inch and 1/4 inch tubing in a single branch. It is not for applications requiring metal construction or threaded pipe connections. Buyers needing all three ports at identical diameters should select a different fitting. Systems demanding higher temperature ratings than nylon provides must use alternative materials.

Mixed 3/8 inch and 1/4 inch tube ports

The defining specification is the combination of two 3/8 inch ports and one 1/4 inch port in a tee layout. This mixed sizing determines whether the fitting matches the specific tubing plan. Verify the three outer diameters against the circuit design before purchase. The nylon body and push-to-connect ends are secondary to this port arrangement.

Highlights

  • Push-to-connect design speeds installation without tools
  • Three-port tee splits 3/8 in and 1/4 in tubing runs
  • Nylon body resists corrosion in potable-water systems
  • Suitable for carbon-dioxide and drinking-water applications
  • White colour aids quick visual identification in plumbing layouts

Specifications

BrandPARKER

Questions about this item

Should I pick the 6304 60 56WP2 tee or a straight connector for my 3/8 in and 1/4 in tubing?

Choose the 6304 60 56WP2 tee when you need to split or join three lines — two 3/8 in ports and one 1/4 in port — in a single white nylon fitting.

What does the push-to-connect design mean when I install this tee in a potable-water or CO₂ line?

Push each tube into the three ports until it seats; the internal collet grips the 3/8 in or 1/4 in OD without tools or separate sealant.

How does the nylon body and push-fit interface limit pressure or temperature in real use?

The nylon tee handles typical potable-water and carbon-dioxide service at the pressures and temperatures rated for Parker push-to-connect fittings in those applications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.