We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White push-fit elbow union with two 1/2 inch tube connections

Parker

Parker 6302 62 00WP2 90 Elbow Union 1/2 in White

SKU CH-65PW-SWE1N

White push-fit elbow joins two 1/2 in tubes, rated 230 psi and 200 Degrees F

  • Push-to-connect ends speed up installation
  • 90-degree elbow routes tubing in tight spaces
  • 1/2 inch size fits standard tube dimensions
  • Bio-based nylon body resists corrosion
  • Rated for 230 psi at 200 degrees F

Parker 6302 62 00WP2 90 Elbow Union

This push-fit elbow fitting joins two half-inch tubes at a ninety-degree angle using a tool-free connection. It is intended for vacuum lines in automotive, pneumatic or light industrial systems where quick assembly and disassembly are required.

1/2 in Push-to-Connect on Both Ends

Each end accepts a half-inch outer-diameter tube and seals by simply pushing the tube into the fitting. No threads, clamps or solvent are needed, so installation is fast and repeatable in confined engine bays or equipment cabinets.

Bio-Based Nylon Body Rated to 230 psi

The white bio-based nylon construction handles vacuum and low-pressure fluid circuits up to the stated pressure and temperature limits. It is not suited for high-temperature hydraulic systems or applications exceeding the rated pressure and temperature envelope.

Highlights

  • Push-to-connect ends speed up installation
  • 90-degree elbow routes tubing in tight spaces
  • 1/2 inch size fits standard tube dimensions
  • Bio-based nylon body resists corrosion
  • Rated for 230 psi at 200 degrees F

Specifications

BrandPARKER

Questions about this item

What does the 230 psi rating mean when the elbow is installed in a vacuum line?

It indicates the fitting can withstand up to 230 psi internal pressure, so it will not burst or leak when the system runs well below that limit in vacuum service.

How does the push-to-connect interface on both ends affect installation speed?

Each 1/2 in tube end locks in place with a simple push, eliminating threading or tools and cutting assembly time to seconds per joint.

What clearance is needed for the 1 27/32 in overall length when routing the elbow?

The elbow measures 1 27/32 in from end to end, so allow at least that much straight run plus tube-insertion depth on each side for a clean 90-degree turn.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.