Parker
Parker 6302 60 00WP2 Push-Fit Elbow Fitting 3/8 in Bio-Based Nylon White
Push-fit elbow connects 3/8 inch tubing at a right angle, made from bio-based nylon rated for 230 psi and 200 degrees Fahrenheit
- Push-to-connect ends speed installation without tools
- Bio-based nylon construction reduces environmental impact
- 230 psi rating handles demanding pneumatic systems
- Operates up to 200 °F for high-temperature lines
- Compact 1 11/32 in length fits tight spaces
Parker 6302 Push-Fit Elbow Fitting
This Parker 6302 elbow fitting joins two 3/8 inch tubes at a right angle using push-to-connect ends on both sides. The body is moulded from bio-based nylon and finished in white. It is rated for vacuum applications with a maximum operating pressure of 230 psi and a maximum operating temperature of 200 degrees Fahrenheit. Overall length measures 1 11/32 inches. No thread sealant is included or pre-applied.
Suited for vacuum lines needing a 3/8 inch
Installers running low-pressure vacuum circuits with 3/8 inch tubing will find this fitting matches the tube size and connection method required. The bio-based nylon construction handles the stated pressure and temperature range. It is not intended for systems that demand threaded ports, compression nuts or a different tube diameter. Buyers who need a straight coupling, a tee, or a fitting that accepts other tube sizes should select a different part.
Maximum operating pressure 230 psi
The 230 psi rating is the single figure that determines whether this elbow can stay sealed in your vacuum circuit. If the system pressure ever exceeds this value the fitting is not guaranteed to hold. No other specification overrides this limit.
Highlights
- Push-to-connect ends speed installation without tools
- Bio-based nylon construction reduces environmental impact
- 230 psi rating handles demanding pneumatic systems
- Operates up to 200 °F for high-temperature lines
- Compact 1 11/32 in length fits tight spaces
Specifications
| Brand | PARKER |
|---|
Questions about this item
Does the Parker 6302 elbow include any tubing or thread sealant in the box?
The fitting is sold individually with no tubing or pre-applied thread sealant included.
Which tube size should I select for a 3/8 in push-to-connect system?
Choose the 3/8 in tube outer diameter version, which matches both Side A and Side B connections.
Will the 230 psi rating hold on a hot-water line that reaches 200 Degrees F?
Yes, the bio-based nylon fitting is rated for 230 psi maximum operating pressure at 200 Degrees F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



