Panorama Antennas
Panorama Antennas BSM-6-60-05NJ 4G/5G MIMO omni tube network antenna 0.5 m N (f)
Omni-directional tube antenna covers 617-960 MHz and 1427-6000 MHz with 2x2 MIMO and N-Type Female connectors
- TypeAntenna
- ColorGrey
- SpecificationsMIMO Type: 2x2 MIMO Antenna Connectors: N-Type Female Freque
- Wide 4G/5G coverage from 617-960 MHz and 1427-6000 MHz
- 2x2 MIMO boosts throughput with dual polarisation
- N-Type female connectors fit standard 50 Ohm cables
- Omnidirectional pattern simplifies site placement
- Handles up to 10 W input power
Antenna Type and Target Use
The Panorama BSM-6-60-05NJ is a 2x2 MIMO omni tube antenna built for 4G and 5G networks. It serves installers and system integrators who need a single radome covering 617-960 MHz and 1427-6000 MHz bands. The grey housing mounts vertically on a mast or pole for fixed wireless access or IoT gateway deployments. Its N-Type female connectors accept standard 50 Ohm coaxial cables.
Connector and Gain Impact
Two N-Type female ports feed the internal dual-element array, each rated for 10 W maximum input power. Gain varies by band: 3 dBi at 617-960 MHz, 6 dBi at 1427-2700 MHz, and 5 dBi across 3400-4200 MHz and 4.9-6000 MHz. This profile improves signal-to-noise ratio for downstream routers or modems without requiring separate antennas per band. The 0.5 m pigtail length is fixed.
Suitability and Limits
The antenna suits outdoor installations where a compact, multi-band MIMO solution is required and N-Type cabling is standard. It does not suit buyers who need SMA or RP-SMA connectors directly on the radome, nor those requiring higher gain on the 617-960 MHz band. Installers needing adjustable tilt or a different radome diameter should look elsewhere.
Highlights
- Wide 4G/5G coverage from 617-960 MHz and 1427-6000 MHz
- 2x2 MIMO boosts throughput with dual polarisation
- N-Type female connectors fit standard 50 Ohm cables
- Omnidirectional pattern simplifies site placement
- Handles up to 10 W input power
Specifications
| Brand | Panorama |
|---|---|
| Model | BSM-6-60-05NJ |
| Type | Antenna |
| Color | Grey |
| Specifications | MIMO Type: 2x2 MIMO Antenna Connectors: N-Type Female Frequency Range: 617-960 / 1427-6000 MHz Antenna Gain: 617-960MHz: 3dBi, 1427-2700 MHz: 6dBi, 3400-4200MHz: 5dBi, 4.9-6000Mhz: 5dBi Impedance: 50 Ohms Max Input Power: 10 W Dimension: 21.25" x 3.38" x 3.38" |
| Shipping weight | 2.27 kg |
| Package size | 610 × 127 × 127 mm |
Questions about this item
Will the N-Type Female connectors on the BSM-6-60-05NJ need periodic re-torquing or replacement?
The N-Type Female connectors are rated for 50 Ohms impedance and 10 W max input power. They are passive RF interfaces with no moving parts, so they do not require scheduled re-torquing or replacement under normal outdoor installation.
What is the first performance limit reached when the antenna operates continuously at 10 W input power?
The specified Max Input Power is 10 W. Sustained operation at this level makes thermal dissipation in the 21.25" x 3.38" x 3.38" radome the primary limit before any electrical breakdown occurs.
How much does the radome temperature rise when the BSM-6-60-05NJ runs at 10 W all day in direct sun?
The antenna is a passive 2x2 MIMO array with no active electronics, so it generates no self-heating. The grey radome will reach ambient temperature plus solar gain, but RF loss at 10 W is negligible.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
