We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pannet Cat 6 UTP patch cable, 28 AWG with modular plugs on each end

Pannet

Pannet UTP28SP5 28 AWG Cat 6 network ethernet cable 5 ft

SKU CH-X07W-697K3 MPN UTP28SP5

A 5 ft Category 6 patch cable using 28 AWG conductors and TX6 modular plugs on both ends

  • Cat6
  • Length5 ft.
  • Category 6 performance for gigabit networks
  • 28 AWG thin conductors simplify tight routing
  • TX6 modular plugs ensure reliable connections
  • Five-foot length suits close device links
  • Panduit build quality for lasting durability

Network patch cord for Cat 6 links

This five-foot Category 6 UTP patch cord uses 28 AWG conductors and TX6 modular plugs on both ends. It is built for standard Gigabit Ethernet connections in home offices, small-business networks or lab benches. The slim profile suits tight cable-management spaces where a full-size cord would be awkward.

Thermals noise and power draw

Passive copper construction means no fans, no active cooling and zero electrical power consumption. The cable adds no audible noise to the installation and generates no measurable heat during normal data transfer. It simply carries the signal between two powered ports without drawing current itself.

Deciding specification 28 AWG Cat 6

The 28 AWG gauge sets the bend radius and insertion-force limits that determine whether the cord fits your patch panel, switch density or cable tray. If your rack demands thicker conductors for PoE budgets or longer runs, this cable will not meet those requirements. Buyers who need a heavier gauge or a different category should select another part.

Highlights

  • Category 6 performance for gigabit networks
  • 28 AWG thin conductors simplify tight routing
  • TX6 modular plugs ensure reliable connections
  • Five-foot length suits close device links
  • Panduit build quality for lasting durability

Specifications

BrandPanduit
Cat6
Length5 ft.
Shipping weight0.45 kg
Package size170 × 145 × 10 mm

Questions about this item

How do I install the 28 AWG Cat 6 cable without damaging the thin conductors?

Route the cable gently, avoiding tight bends or pulling tension on the 28 AWG wires, then press each TX6 modular plug firmly until the latch clicks into the port.

What maintenance or replacement will the 28 AWG Cat 6 patch cord need over time?

Inspect the TX6 modular plugs and 28 AWG conductors periodically for bent pins, latch wear, or jacket damage; replace the cord if any connector no longer clicks securely.

What limit appears first on the 28 AWG Cat 6 cable during sustained high-throughput use?

The 28 AWG conductors have higher insertion loss than thicker gauges, so signal attenuation over the 5 ft length becomes the limiting factor under continuous heavy traffic.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.