We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White three-gang deep mounting box, two-piece screw-together design, 7.00"L x 5.19"W x 2.75"H

Pannet

Pannet JBP3DWH network ethernet cable mounting box three gang 7.00"L x 5.19"W x 2.75"H

SKU CH-TH51-B0TVH MPN JBP3DWH

Three-gang deep outlet box accepts standard faceplates and connects to surface raceway systems with multiple conduit breakouts

  • Three gang capacity fits multiple outlets
  • Two piece screw together design speeds installation
  • Accepts Pan Way screw on faceplates or NEMA standard three gang plates
  • Compatible with Pan Way LD LDPH and T 45 raceway systems
  • Breakouts for half inch three quarter inch and one inch conduit

Three-gang deep outlet box

The Pannet JBP3DWH is a three-gang two-piece screw-together deep outlet box designed for network ethernet cable installations. It accepts Pan-Way screw-on faceplates or any NEMA standard three-gang faceplates. The box is intended for use with Pan-Way LD, LDPH or T-45 surface raceway systems. Its deep profile provides ample space for cable management and terminations.

Conduit breakout compatibility

The single specification that decides fit is the set of conduit breakouts sized for 1/2", 3/4" and 1" diameter conduit. These knockouts determine which raceway or conduit systems can enter the box directly. If your installation uses a different conduit size, the box will not accommodate it without modification. Match the breakout to your raceway before purchase.

Build integration and space

The box measures 7.00"L x 5.19"W x 2.75"H (177.9 mm x 131.9 mm x 69.8 mm) and mounts on a flat surface as part of a surface raceway run. It needs a compatible Pan-Way raceway system or standard NEMA faceplate to complete the enclosure. The deep interior frees up room for cable bends and connector bulk behind the faceplate. It is not suited for single-gang or two-gang faceplate requirements.

Highlights

  • Three gang capacity fits multiple outlets
  • Two piece screw together design speeds installation
  • Accepts Pan Way screw on faceplates or NEMA standard three gang plates
  • Compatible with Pan Way LD LDPH and T 45 raceway systems
  • Breakouts for half inch three quarter inch and one inch conduit

Specifications

No published specifications for this item yet.

Questions about this item

What does the three-gang capacity mean once the box is installed?

It provides space for three standard NEMA faceplates or Pan-Way screw-on plates, letting you mount up to three keystone jacks or outlets side by side in one enclosure.

Which raceway systems does the box interface with, and what conduit sizes do the breakouts accept?

It connects to Pan-Way LD, LDPH and T-45 surface raceways, and the moulded breakouts accommodate 1/2", 3/4" and 1" conduit diameters.

What are the exact external dimensions and depth needed to fit the box?

The box measures 7.00"L x 5.19"W x 2.75"H (177.9 mm x 131.9 mm x 69.8 mm), so allow that footprint plus clearance for the two-piece screw-together assembly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.