We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black nylon push-in cable tie mount with rectangular base and vertical slot

Panduit

Panduit SGMPMS25-C0 Masonry Push-In Cable Ties Mount, Black, 0.53 in

SKU CH-3ZCD-8HFTE

A push-in masonry mount for miniature to standard cable ties, made from Nylon 6/6 with a 0.25 in hole size and CE and RoHS compliance

  • TypeCable Management & Conduit
  • ColorBlack
  • Secure masonry mounting with 0.25 in push-in hole
  • Organises miniature to standard cable ties in 0.53 in length
  • Withstands extreme temperatures from -104 to 185 °F
  • Durable Nylon 6/6 construction in black finish
  • CE and RoHS compliant for regulated environments

Masonry Cable Tie Mount

The Panduit SGMPMS25-C0 is a push-in mount designed for masonry surfaces. It accepts miniature, intermediate and standard cable ties for securing wire bundles. The nylon 6/6 body measures .53 in long by .55 in wide by 1.24 in high. Installation requires a .25 in diameter hole in the mounting surface.

Thermal And Environmental Range

The mount operates from -104 degrees to 185 degrees Fahrenheit without flame-retardant additives. Nylon 6/6 maintains mechanical strength across this span in typical indoor or sheltered outdoor runs. No active cooling or power draw is involved because the part is a passive fastener. CE and RoHS compliance confirm restricted-substance limits.

Upgrade From Adhesive Or Screw Mounts

This push-in mount replaces adhesive-backed bases that can fail on dusty or damp masonry. It also removes the need for separate anchors and screws when a .25 in hole can be drilled. The jump is worth it for installers who want faster placement and a flush profile on brick, block or concrete.

Highlights

  • Secure masonry mounting with 0.25 in push-in hole
  • Organises miniature to standard cable ties in 0.53 in length
  • Withstands extreme temperatures from -104 to 185 °F
  • Durable Nylon 6/6 construction in black finish
  • CE and RoHS compliant for regulated environments

Specifications

BrandPanduit
TypeCable Management & Conduit
ColorBlack

Questions about this item

How do I install the push-in mount in masonry and what step is often missed?

Drill a 0.25 in hole in the masonry, push the mount in until the base seats flush, then insert the cable tie through the 0.25 in wide by 0.1 in high slot; the step often missed is verifying the mount is fully seated before loading the tie.

Will the Nylon 6/6 mount degrade and need replacement over time?

The Nylon 6/6 material is rated for -104 to 185 degrees F and is CE and RoHS compliant; it is not flame retardant or metal detectable, so replacement is only needed if physical damage or prolonged exposure beyond the temperature range occurs.

What is the first limit reached under sustained heavy cable loads?

The 0.25 in wide by 0.1 in high slot and the push-in retention in a 0.25 in masonry hole set the mechanical limit; exceeding the 185 degrees F max temperature rating or overloading the slot dimensions will cause failure first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.