We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue nylon ring terminal with 3/8 inch stud hole and tin-plated copper barrel

Panduit

Panduit PN14-38R-L Ring Terminal 3/8 in Stud 14 AWG 600 V Nylon

SKU CH-84WP-EA780

Nylon-insulated ring terminal crimps 14 AWG wire to a 3/8 in stud, rated 600 V and 221 °F

  • TypeElectrical Connectors
  • Crimp termination for secure connections
  • 600 V rating supports standard circuits
  • Nylon insulation resists heat to 221 °F
  • UL 486A and 486B listed for safety
  • Tin-plated copper contact ensures conductivity

Ring Terminal 3/8 in Stud 14 AWG

This Panduit ring terminal accepts 14 AWG to 18 AWG wire and fits a 3/8 inch stud. The nylon insulation provides partial coverage and is rated for 600 V maximum voltage. Tin-plated copper contacts ensure reliable conductivity in electrical and industrial wiring applications. It meets UL 486A, UL 486B and CSA C 22.2 No. 65 standards.

Upgrade From Smaller Stud Or Lower Voltage

This terminal replaces connectors with smaller stud sizes or lower voltage ratings when a 3/8 inch stud and 600 V capacity are required. The jump is worth it when the application demands the larger stud diameter and the higher voltage headroom for safe operation. Crimp termination with an insulation grip barrel adds mechanical security compared to non-insulated alternatives.

Capacity Handles 14 AWG At 600 V

The barrel inside diameter of 0.16 in and length of 0.57 in accommodate 14 AWG wire comfortably within the 600 V rating. Maximum operating temperature reaches 221 Degrees F with a UL 94 flammability rating of HB, V-2. It runs out when wire exceeds 14 AWG or when the stud size differs from 3/8 inch.

Highlights

  • Crimp termination for secure connections
  • 600 V rating supports standard circuits
  • Nylon insulation resists heat to 221 °F
  • UL 486A and 486B listed for safety
  • Tin-plated copper contact ensures conductivity

Specifications

TypeElectrical Connectors
BrandPANDUIT

Questions about this item

Will the 3/8 in stud opening fit my existing bolt pattern?

The ring terminal has a 3/8 in stud size and a 0.53 in tongue width, so match those dimensions to your bolt pattern before crimping.

Which crimp tool setting should I use for the 14 AWG barrel?

Use a crimp die that matches the 0.16 in barrel inside diameter and 0.57 in barrel length; the common mistake is selecting a die for the wire gauge instead of the barrel dimensions.

When should I replace the terminal if the nylon insulation starts to degrade?

The nylon insulation carries a UL 94 HB and V-2 rating with a 221 °F maximum operating temperature; replace the terminal if the insulation shows cracking, discoloration, or melting near that temperature limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.