We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow nylon-insulated ring terminal with tin-plated copper barrel, 1/2 inch stud hole

Panduit

Panduit PN10-12R-Q Ring Terminal 1/2 in Stud 10 AWG 600 V Nylon

SKU CH-825T-VR8ZP

A crimp-style ring terminal accepting 10-12 AWG wire with a 1/2 in stud hole, nylon insulation rated to 221 °F and 600 V

  • TypeElectrical Connectors
  • Designed for 10 AWG wire up to 600 V
  • Nylon insulation rated to 221 °F with UL 94 V-2 flammability
  • Tin-plated copper barrel ensures reliable crimp termination
  • 1/2 in stud size fits 0.52 in hole diameter
  • Meets UL 486A, UL 486B and CSA C 22.2 No. 65 standards

Electrical connector for 10 AWG circuits

This Panduit ring terminal accepts 10 AWG wire with a minimum of 12 AWG and is rated for 600 V. The nylon insulation provides partial coverage and carries a UL 94 HB, V-2 flammability rating. A tin-plated copper contact ensures reliable conductivity for industrial and automotive wiring tasks.

Suits panel builders needing a 1/2 in stud ring

The 0.52 in hole diameter fits a 1/2 in stud, while the 0.72 in tongue width and 0.74 in barrel length match standard lug patterns. Crimp termination with an insulation-grip barrel speeds installation. Buyers who need fully insulated coverage or a different stud size should look at other terminal styles.

Holds specification up to 221 °F under continuous

The terminal meets CSA C 22.2 No. 65, UL 486A and UL 486B standards for sustained operation at the rated temperature. Tin plating resists oxidation during long-term service, and the nylon insulation retains mechanical integrity at the maximum operating temperature. Crimp joints remain secure through thermal cycling in demanding environments.

Highlights

  • Designed for 10 AWG wire up to 600 V
  • Nylon insulation rated to 221 °F with UL 94 V-2 flammability
  • Tin-plated copper barrel ensures reliable crimp termination
  • 1/2 in stud size fits 0.52 in hole diameter
  • Meets UL 486A, UL 486B and CSA C 22.2 No. 65 standards

Specifications

BrandPANDUIT
TypeElectrical Connectors

Questions about this item

What wire gauges must I already have to crimp this 10 AWG ring terminal?

The terminal accepts solid or stranded copper from 12 AWG up to 10 AWG, so have wire in that range ready before crimping.

Will the 0.52 in stud hole fit the 1/2 in bolts on my existing bus bar?

Yes, the 0.52 in hole diameter matches a standard 1/2 in stud, so it slides onto the same bolts you already use.

How can I verify the crimp is solid after I install the terminal?

After crimping, tug the wire firmly; it should not pull out, and the tin-plated copper barrel should show even compression without cracked nylon insulation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.