Panduit
Panduit PLT1M-M Cable Tie 4 in Natural Nylon 6/6 18 lb
A 4-inch nylon cable tie rated for 18 lb tensile strength, halogen-free and plenum-rated for indoor wiring bundles up to 0.87 in. diameter
- Color/FinishNatural
- MaterialNylon
- TypeCable Ties
- Length22.000
- Miniature 4 in cable tie fits tight bundles
- 18 lb tensile strength holds wiring securely
- Nylon 6/6 material resists heat up to 185 °F
- Halogen-free low-smoke construction suits plenum spaces
- UL Type 2 21 listing confirms code compliance
Miniature cable tie 4 in
The Panduit PLT1M-M is a miniature nylon 6/6 cable tie with a nominal length of 4 in and an actual length of 3.9 in. It uses a plastic pawl locking style and has a tensile strength of 18 lb. The tie is halogen-free, low-smoke and plenum rated for indoor installations.
For light bundling only
This tie suits installers who need a small, plenum-rated fastener for lightweight cable bundles up to 0.87 in diameter. It is not for buyers who need a flame-retardant strap or a metal-detectable version. Outdoor use is not supported and the operating range stops at 185 degrees F.
Tensile strength 18 lb
The 18 lb tensile strength is the single figure that determines whether this tie can hold your bundle. At 0.1 in wide and 0.05 in thick, it is designed for miniature applications only. Verify the load requirement before specifying this part.
Highlights
- Miniature 4 in cable tie fits tight bundles
- 18 lb tensile strength holds wiring securely
- Nylon 6/6 material resists heat up to 185 °F
- Halogen-free low-smoke construction suits plenum spaces
- UL Type 2 21 listing confirms code compliance
Specifications
| Brand | PANDUIT |
|---|---|
| Color/Finish | Natural |
| Material | Nylon |
| Type | Cable Ties |
| Length | 22.000 |
Questions about this item
What bundle diameter does the 4 in cable tie actually secure?
The tie handles bundles up to 0.87 in diameter despite its 4 in nominal length.
What mounting method does the plastic pawl lock require?
No separate mount is needed; the integral pawl locks directly onto the strap as you pull it tight.
How do you install the tie without over-tightening the 18 lb tensile rating?
Pull the tail through the pawl by hand until snug, then stop — do not use tools that can exceed the 18 lb limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
