Panduit
Panduit FSD81-10-D Ferrule 12 AWG 17/32in PK500
Tin-plated copper ferrule for 12 AWG wire with 17/32 in. insertion length, supplied in a pack of 500
- Reliable crimp termination backed by CSA, DIN and UL standards
- Tin-plated copper barrel resists corrosion for lasting conductivity
- Gray polypropylene insulation rated to 221 °F for high-heat environments
- 12 AWG single-size ferrule ensures precise fit on 17/32 in insertion length
- Bulk pack of 500 pieces supports volume wiring projects
Ferrule Kit for 12 AWG Wire
This pack contains 500 tin-plated copper ferrules designed for 12 AWG conductors. The grey polypropylene insulation identifies the wire size at a glance. Each ferrule accepts a single 12 AWG wire and is crimped for a secure termination. The kit suits panel builders and electricians preparing wire ends for terminal blocks.
Crimp Termination with Standard Compliance
The barrel measures 0.19 inches in diameter and 0.3 inches long, while the overall ferrule diameter is 0.13 inches. An insertion length of 17/32 inches guides the conductor into the barrel. The parts meet CSA C 22.2 No. 291-14, DIN 46228 and UL 486F standards. They are not intended for wire sizes other than 12 AWG.
Rated for 221 °F Maximum Operating Temperature
The copper barrel and tin finish maintain conductivity up to 221 degrees Fahrenheit. Polypropylene insulation remains stable within this thermal range. No active cooling or forced airflow is required for normal panel use. The components are passive and draw no power themselves.
Highlights
- Reliable crimp termination backed by CSA, DIN and UL standards
- Tin-plated copper barrel resists corrosion for lasting conductivity
- Gray polypropylene insulation rated to 221 °F for high-heat environments
- 12 AWG single-size ferrule ensures precise fit on 17/32 in insertion length
- Bulk pack of 500 pieces supports volume wiring projects
Specifications
| Brand | PANDUIT |
|---|
Questions about this item
What wire size does the 12 AWG ferrule accept and what standard covers it?
It accepts 12 AWG wire only and complies with UL 486F, CSA C 22.2 No. 291-14 and DIN 46228.
What barrel length and ferrule diameter must the crimp tool accommodate?
The barrel length is .3 in and the ferrule diameter is .13 in, so the tool must match those dimensions.
How is the ferrule terminated and what common mistake should be avoided?
Termination is by crimp; the step people get wrong is using a die that does not match the .19 in barrel diameter and .3 in barrel length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
