Panduit
Panduit FSD73-6-D Ferrule 24 AWG Yellow 3/8in PK500
Pack of 500 yellow insulated ferrules for 24 AWG wire with 3/8in insertion length and tin-plated copper barrels
- Tin-plated copper barrel ensures reliable conductivity
- Yellow polypropylene insulation identifies 24 AWG wires instantly
- 3/8 in insertion length suits standard terminal blocks
- Meets CSA C22.2 No. 291-14 and DIN 46228 Part 4
- Pack of 500 ferrules supports high-volume wiring jobs
Panduit FSD73-6-D 24 AWG Ferrule
The Panduit FSD73-6-D is a wire ferrule designed for 24 AWG conductors. It provides a secure crimp termination for generator parts and electrical accessories. The yellow polypropylene insulation identifies the wire size at a glance. This pack contains 500 pieces for high-volume wiring tasks.
Tin-plated copper barrel
The barrel uses copper with a tin-plated finish for corrosion resistance. Polypropylene insulation withstands a maximum operating temperature of 221 degrees F. The crimp style ensures a reliable connection without soldering. These materials meet CSA C 22.2 No. 291-14 and DIN 46228 Part 4 standards.
24 AWG capacity with 3/8 inch insertion length
The ferrule accepts a minimum and maximum wire size of 24 AWG only. It offers a barrel diameter of 0.07 in and a barrel length of 0.17 in. The insertion length is 3/8 in with a ferrule diameter of 0.04 in. It is not suitable for wire gauges larger or smaller than 24 AWG.
Highlights
- Tin-plated copper barrel ensures reliable conductivity
- Yellow polypropylene insulation identifies 24 AWG wires instantly
- 3/8 in insertion length suits standard terminal blocks
- Meets CSA C22.2 No. 291-14 and DIN 46228 Part 4
- Pack of 500 ferrules supports high-volume wiring jobs
Specifications
| Brand | PANDUIT |
|---|
Questions about this item
Will the yellow polypropylene insulation on these 24 AWG ferrules need replacement after repeated crimping?
The polypropylene insulation is moulded onto each ferrule and rated to 221 degrees F, so it remains intact for the life of the crimp; no separate replacement is required.
What stops me from inserting a wire larger than 24 AWG into the 0.04 in ferrule diameter?
The barrel diameter is 0.07 in and the ferrule diameter is 0.04 in, both sized for 24 AWG only; a larger conductor will not fit through the entry.
Do the tin-plated copper barrels run hot when the generator operates continuously at full load?
The ferrules are rated for a maximum operating temperature of 221 degrees F, so heat rise under normal generator loads stays within the specified limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
