Panduit
Panduit Fiber Optic Cable ST Male 62.5/125µm Ivory
A 62.5/125 µm multimode fiber patch lead with ST male connectors at both ends for 900 µm tight-buffered installation
- TypeNetwork Cable
- ColorIvory
- Connector Detail1 x ST Male Network
- ST male connectors ready for 62.5/125 µm multimode networks
- 900 µm tight-buffered fiber protects the core during installation
- Ivory jacket simplifies cable identification in dense racks
- Simplex design carries one signal path for point-to-point links
- Panduit engineering backs consistent performance in enterprise cabling
Panduit Fiber Optic Cable ST Male 62.5/125µm
This Panduit fiber optic cable provides a simplex multimode link for network devices. It uses 62.5/125 µm core/cladding dimensions with a tight-buffered 900 µm construction. Both ends terminate in ST male connectors. The jacket colour is Electric Ivory.
Suits short multimode links with ST ports
Installers patching legacy multimode equipment will find the correct connector and core size here. Builders who need duplex connectivity or single-mode fibre should look at a different cable. The simplex design carries one transmit or receive path only.
62.5/125 µm multimode core decides compatibility
The core and cladding diameters determine which transceivers and existing cabling this patch lead can join. Matching the 62.5 µm core is essential for low-loss splices and connector mating. A different core size will cause excessive insertion loss.
Highlights
- ST male connectors ready for 62.5/125 µm multimode networks
- 900 µm tight-buffered fiber protects the core during installation
- Ivory jacket simplifies cable identification in dense racks
- Simplex design carries one signal path for point-to-point links
- Panduit engineering backs consistent performance in enterprise cabling
Specifications
| Brand | Panduit |
|---|---|
| Type | Network Cable |
| Color | Ivory |
| Connector Detail | 1 x ST Male Network |
Questions about this item
Will the 900 µm tight-buffered fiber fit standard ST patch panels?
The 900 µm tight-buffered fiber terminates in ST male connectors that mate with standard ST bulkhead adapters used in patch panels.
How do I install the ST connectors without damaging the 62.5/125 µm multimode cores?
Insert each ST male connector into the adapter until the bayonet locks with a quarter-turn; avoid over-torquing the metal housing.
When should I replace this simplex multimode cable?
Replace if insertion loss exceeds your link budget, the ST ferrule end-face shows scratches under inspection, or the ivory jacket is kinked or cracked.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



