We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red nylon quick-disconnect terminals, 22-18 AWG, pack of 100

Panduit

Panduit DNF18-250FIB-C Red Nylon Quick Disconnect 22-18 AWG PK100

SKU CH-QVBV-VFR8C

Red nylon quick-disconnect terminals crimp 22–18 AWG wire, accept .25-inch tabs, and handle 600 V at 221 °F in a 100-piece pack

  • TypeElectrical Connectors
  • Full insulation coverage protects connections
  • Red nylon insulation identifies 22-18 AWG range
  • Quick disconnect design enables fast crimp termination
  • 600 V rating suits automotive electrical systems
  • UL 310 and CSA 22.2 No. 153 compliance

Quick Disconnect Terminals for 22-18 AWG

These red nylon quick disconnect terminals accept wire sizes from 22 to 18 AWG and feature a 0.25 inch tab width. The brass contacts have a tin finish and a butted seam design. They are supplied in a pack of 100 pieces for volume wiring tasks.

Thermals and Electrical Ratings

The nylon insulation carries a UL 94 HB flammability rating and withstands a maximum operating temperature of 221 degrees F. The connectors are rated for up to 600 volts and meet CSA 22.2 No. 153 and UL 310 standards. RoHS compliance is confirmed for restricted substance limits.

Full Insulation Coverage and Crimp Termination

Full insulation coverage protects the crimp joint and reduces exposure to accidental contact. The crimp termination style allows fast, solderless installation with standard hand tools. Buyers needing a larger tab width or a different wire gauge range should select an alternative part.

Highlights

  • Full insulation coverage protects connections
  • Red nylon insulation identifies 22-18 AWG range
  • Quick disconnect design enables fast crimp termination
  • 600 V rating suits automotive electrical systems
  • UL 310 and CSA 22.2 No. 153 compliance

Specifications

TypeElectrical Connectors
BrandPANDUIT

Questions about this item

How do I crimp the 22-18 AWG wires into these red nylon quick disconnects without damaging the butted seam?

Strip each wire to the correct length, insert fully into the brass barrel so the insulation sits against the nylon funnel, then crimp with a ratchet tool calibrated for 22-18 AWG; the butted seam must face the anvil, not the indenter, otherwise the seam splits under load.

Will the tin-plated brass contacts need replacement due to oxidation in a 221 °F engine bay?

The tin finish resists oxidation up to the 221 °F maximum operating temperature; if the ambient temperature stays below that limit and the crimp remains mechanically sound, the contacts do not require scheduled replacement.

At what current does the 0.25 in tab width become the limiting factor during sustained operation?

The 0.25 in tab is rated for 600 V per UL 310; sustained current is limited by the 18 AWG wire gauge and the 221 °F temperature ceiling rather than the tab dimensions themselves.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.