We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue insulated butt splice connector, tin-plated copper barrel, 1.15 inch overall length

Panduit

Panduit BSN14-C Blue Butt Splice Connector 16-14 AWG 1.15 in PK100

SKU CH-Y0C5-MK6ES

Blue crimp butt splice joins 16-14 AWG wires, rated 600 V and 221 °F with UL 486C and CSA C22.2 No. 65 approval

  • TypeBuilding Wire
  • Crimp termination for fast, reliable wire joins
  • Blue nylon insulation identifies 16-14 AWG range
  • Tin-plated copper barrel resists corrosion
  • UL 486C and CSA C22.2 No. 65 listed
  • 100 connectors per pack for volume jobs

Crimp Splice for 16–14 AWG Wire

These butt splice connectors join solid or stranded copper conductors from 16 to 14 AWG using a crimp termination. The blue nylon insulation identifies the wire range at a glance and meets UL 94 HB and V-2 flammability ratings. Each barrel is brazed seam with a tin-plated copper body for reliable electrical continuity. A pack of 100 pieces suits panel builders and maintenance technicians.

600 V Maximum Voltage Rating

The connectors are rated for 600 volts maximum, which determines whether they can be used in a given control circuit or power distribution run. This voltage ceiling is the single figure that decides if the part matches the system design. No higher voltage rating is claimed, so circuits exceeding 600 V require a different component.

Nylon Insulation and Tin-Plated Barrel

The nylon sleeve provides insulation up to 221 degrees Fahrenheit and resists common oils and solvents found in industrial environments. Tin plating on the copper barrel improves corrosion resistance and eases crimp tool engagement. These material choices affect long-term reliability in vibration-prone cabinets but do not alter the wire-range or voltage limits.

Highlights

  • Crimp termination for fast, reliable wire joins
  • Blue nylon insulation identifies 16-14 AWG range
  • Tin-plated copper barrel resists corrosion
  • UL 486C and CSA C22.2 No. 65 listed
  • 100 connectors per pack for volume jobs

Specifications

BrandPANDUIT
TypeBuilding Wire

Questions about this item

How does the 600 V maximum voltage rating apply when I install this splice in my circuit?

The 600 V rating is the highest voltage the connector's insulation is certified to withstand; it does not change the voltage of your circuit, it simply means the splice is safe to use on any system operating at or below 600 V.

What do the UL 486C and CSA C22.2 No. 65 standards cover for this butt splice?

Those standards verify that the crimp connection meets North American safety requirements for wire connectors, including mechanical pull-out strength and temperature-rise limits for 16–14 AWG copper conductors.

Will the 1.15 in overall length and 0.15 in barrel inside diameter fit inside a standard automotive fuse block?

The splice measures 1.15 in long with a 0.15 in barrel ID, so it fits typical fuse-block terminals that accept 16–14 AWG crimp barrels; verify the terminal cavity depth before crimping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.