Panasonic RP-HT161-K Wired Over-Ear Headphones Black
Lightweight over-ear headphones with 30 mm drivers, 6.5 ft cord and passive noise isolation for music, movies and gaming
- TypeOver the Ear
- ColorBlack
- Driver Unit30 millimeters
- Frequency Response5Hz-27KHz
- THDOver Ear
- Input Impedance32 ohms
- Clear sound from 30 mm neodymium drivers
- Extra bass via XBS and 1000 mW power handling
- Passive noise isolation with padded over-ear cups
- 5 ft cord gives freedom to move
- Lightweight 0.66 lb design for long sessions
Panasonic RP-HT161-K Wired Over-Ear Headphones
These lightweight over-ear headphones connect via a 3.5 mm jack for use with phones, laptops and other portable devices. The 30 mm neodymium drivers deliver a frequency response of 10 Hz to 27 kHz with 98 dB sensitivity. Weighing .66 pounds, they are built for extended listening sessions.
3.5 mm Analogue Connection Limits
The 3.5 mm plug requires a compatible socket on the source device; many modern phones lack this port and need an adapter. Passive noise isolation depends on the earpad seal rather than active cancellation. The 6.5 foot cord provides reach but introduces cable management considerations for mobile use.
Check Device Compatibility Before Ordering
Verify that your phone, laptop or tablet has a 3.5 mm headphone jack or that you own a suitable adapter. Confirm the over-ear form factor suits your wearing preference compared to on-ear or in-ear styles. Ensure the 32 ohm impedance matches the output capability of your intended source for adequate volume.
Highlights
- Clear sound from 30 mm neodymium drivers
- Extra bass via XBS and 1000 mW power handling
- Passive noise isolation with padded over-ear cups
- 5 ft cord gives freedom to move
- Lightweight 0.66 lb design for long sessions
Specifications
| Brand | Panasonic |
|---|---|
| Series | 1 |
| Model | RP-HT161-K |
| Part Number | RP-HT161-K |
| Type | Over the Ear |
| Color | Black |
| Driver Unit | 30 millimeters |
| Frequency Response | 5Hz-27KHz |
| THD | Over Ear |
| Input Impedance | 32 ohms |
| Signal to Noise Ratio(SNR) | 98 decibels |
| Sensitivity | 98 decibels |
| Connector | 3.5mm |
| Ear Coupling | over_ear |
| Weight | 0.66 pounds |
| Noise Cancelling | Passive |
| Wireless Type | Corded |
| Charge Time | 10 hours |
| Microphone Impedance | ~3K ohm |
| Microphone Frequency Response | 27 KHz |
| Microphone Signal to Noise Ratio(SNR) | 98 decibels |
| Microphone Sensitivity | 98 decibels |
| Features | passive_noise_cancellation, Retractable, Media Control, touch, Wired, Over Ear, dynamic_driver, 32 ohm |
Questions about this item
How do the 30 mm drivers and 1000 mW power handling affect everyday listening?
Dual 30 mm neodymium drivers accept up to 1000 mW, delivering strong bass, clear mids and detailed treble for music, movies and gaming without distortion at high volume.
What does the 5 Hz – 27 kHz frequency response mean in practice?
The range extends below typical hearing down to 5 Hz and up to 27 kHz, so you hear deep sub-bass rumble and airy high-frequency detail that cheaper headphones often miss.
How does the 3.5 mm wired connection limit use with modern devices?
The 3.5 mm plug works directly with laptops, controllers and older phones; newer phones without a headphone jack will need a separate USB-C or Lightning adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony ZX Series MDR-ZX110AP Wired On-Ear Headphones White 30mm 3.5mm
- Headphone
usbroway 10-pack VHF Antenna 136-174MHz for Motorola HT1000 MTS2000 XTS2500 XTS3000 XTS3500
- Two-way Radio



