We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Panasonic PT-X510 projector lamp module with housing

Panasonic

Panasonic PT-X510 Projector Lamp 220W ET-LAB80

SKU CH-23MA-HFF48

Genuine 220W UHM replacement lamp with housing, rated 2000 to 3000 hours, for Panasonic PT-X510 projectors

  • TypeProjector Lamp
  • Wattage220W
  • Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
  • Ready-to-install module saves setup time
  • Philips UHM 220W bulb delivers rated brightness
  • 2000 normal hours or 3000 economy hours
  • Built to ISO9001 quality standards
  • Fits Panasonic PT-X510 as ET-LAB80

Panasonic PT-X510 220W Replacement Lamp

The Panasonic PT-X510 projector lamp delivers a 220W UHM bulb inside a pre-assembled housing. It is designed for users who need a direct replacement for the original ET-LAB80 module without extra assembly steps.

Restores Brightness After 2000 to 3000 Hours

This lamp replaces an ageing module once the original reaches its rated 2000 hours in normal mode or 3000 hours in economy mode. The upgrade is worth it when image dimming or colour shift becomes noticeable during presentations or classroom use.

Fits Panasonic Projectors Using ET-LAB80

The complete housing slides into compatible Panasonic projectors that accept the ET-LAB80 part, freeing the installer from handling a bare bulb. It requires a projector model that specifies this lamp type and a power supply capable of driving a 220W UHM source.

Highlights

  • Ready-to-install module saves setup time
  • Philips UHM 220W bulb delivers rated brightness
  • 2000 normal hours or 3000 economy hours
  • Built to ISO9001 quality standards
  • Fits Panasonic PT-X510 as ET-LAB80

Specifications

TypeProjector Lamp
Wattage220W
Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.

Questions about this item

Which projector models accept the ET-LAB80 220W lamp module?

The ET-LAB80 lamp module is designed for the Panasonic PT-X510 projector and fits directly into its lamp compartment without adapters.

What is the correct sequence to install the ET-LAB80 lamp, and which step is most often missed?

Power off and unplug the projector, allow it to cool, remove the lamp cover, release the retaining screws, slide the old module out, insert the new ET-LAB80 until it seats firmly, tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most often forgotten.

When should the ET-LAB80 lamp be replaced based on its rated life?

Plan replacement after approximately 2,000 hours in normal mode or 3,000 hours in economy mode, when brightness drops noticeably or the projector indicates end of lamp life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.