Panasonic
Panasonic PT-VX425N OEM Replacement Projector Lamp 230W
Genuine 230W UHM lamp module delivers 4,000 hours normal or 6,000 hours economy life for Panasonic PT-VX425N projectors
- TypeProjector Lamp
- Wattage230W
- Lamp Life4,000 Hrs. (Normal) - 6,000 Hrs. (Economy)
- Genuine OEM module ensures reliable projector performance
- 230W UHM bulb delivers consistent brightness output
- 4000 hours normal mode extends replacement intervals
- 6000 hours economy mode reduces operating costs
- Pre-assembled housing allows quick tool-free installation
Direct-fit replacement lamp
The Panasonic PT-VX425N OEM replacement projector lamp delivers a 230 watt UHM bulb inside a pre-assembled housing. It matches the original ET-LAV300 module so installers can swap it without tools or alignment steps.
Upgrade from a dimming unit
Replace the lamp when the current unit reaches 4,000 hours in normal mode or 6,000 hours in economy mode and image brightness drops below usable levels. The jump is worth it when colour fidelity and contrast can no longer be corrected through menu adjustments.
Verify the exact projector model
Confirm the projector is a PT-VX425N before ordering because the housing key and connector are model-specific. Check that the existing lamp hour counter can be reset after installation to track the new 4,000 to 6,000 hour service interval.
Highlights
- Genuine OEM module ensures reliable projector performance
- 230W UHM bulb delivers consistent brightness output
- 4000 hours normal mode extends replacement intervals
- 6000 hours economy mode reduces operating costs
- Pre-assembled housing allows quick tool-free installation
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 230W |
| Lamp Life | 4,000 Hrs. (Normal) - 6,000 Hrs. (Economy) |
Questions about this item
What projector models does this ET-LAV300 lamp module fit?
The ET-LAV300 module is built as a direct replacement for the Panasonic PT-VX425N projector and includes a 230W UHM bulb pre-assembled in its housing.
What is the correct way to install this lamp module and what step is often missed?
Power off the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide the old module out, insert the new ET-LAV300 unit until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu so the 4,000-hour normal or 6,000-hour economy counter starts from zero.
When will this 230W UHM bulb need replacement and what indicates it?
Expect roughly 4,000 hours in normal mode or 6,000 hours in economy mode; the projector will warn you when the lamp timer reaches its limit and image brightness will drop noticeably, signalling it is time to fit a new ET-LAV300 module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



