We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Panasonic PT-VW435NU projector lamp module in housing

Panasonic

Panasonic PT-VW435NU projector lamp 280W

SKU CH-WXVA-AJYJE

A ready-to-install 280W PT-VW435NU lamp module rated for 2,500 normal or 4,000 economy hours

  • TypeProjector Lamp
  • Wattage280W
  • Lamp Life2,500 (Normal) - 4,000 (Economy) Hrs.
  • Genuine Ushio NSHA 280W bulb ensures reliable brightness
  • Pre-assembled housing enables quick tool-free replacement
  • 2,500 hours normal mode or 4,000 hours economy mode extends usable life
  • Built to ISO 9001 quality standards for consistent performance
  • Compatible with Panasonic PT-VW435NU projector model ET-LAV200

Ready-to-install 280 W lamp module

The Panasonic PT-VW435NU lamp ships as a complete 280 W bulb-and-housing assembly matched to the ET-LAV200 specification. It is intended for owners of the PT-VW435NU projector who need a direct replacement without sourcing a bare bulb. The module arrives new and pre-aligned for immediate use.

Restores original brightness after 2 500 to 4 000

A fresh module replaces a lamp that has reached the end of its rated 2 500-hour normal or 4 000-hour economy lifespan. The upgrade is worth it when image brightness has faded, colour balance has shifted or the projector warns that lamp hours are exceeded. It returns the projector to factory light output without changing any settings.

Simple housing swap with no alignment needed

Installation consists of opening the projector lamp door, removing the old housing and sliding the new module into place until it seats firmly. No bulb handling, focus adjustment or software reset is required beyond the projector’s own lamp-hour counter. The most common issue is forgetting to reset that counter after installation, which leaves the replacement warning active.

Highlights

  • Genuine Ushio NSHA 280W bulb ensures reliable brightness
  • Pre-assembled housing enables quick tool-free replacement
  • 2,500 hours normal mode or 4,000 hours economy mode extends usable life
  • Built to ISO 9001 quality standards for consistent performance
  • Compatible with Panasonic PT-VW435NU projector model ET-LAV200

Specifications

TypeProjector Lamp
Wattage280W
Lamp Life2,500 (Normal) - 4,000 (Economy) Hrs.

Questions about this item

Does the ET-LAV200 module come pre-assembled in its housing so I only need to slot it into the Panasonic PT-VW435NU?

Yes, the lamp is supplied as a complete 280 W module with the Ushio NSHA bulb already fitted in the housing, ready for direct insertion.

What is the correct sequence to install the ET-LAV200 and which step is most often missed?

Power off the projector, unplug it, allow it to cool, remove the lamp cover, release the retaining screws, slide the old module out, insert the new ET-LAV200 until it seats firmly, re-tighten the screws, replace the cover, plug in, power on, then reset the lamp timer in the menu — the timer reset is the step most frequently forgotten.

How many hours can I expect from the Ushio NSHA 280 W bulb before I need another ET-LAV200 module?

The lamp is rated for 2,500 hours in normal mode or 4,000 hours in economy mode; plan replacement when the projector warning appears or image brightness drops noticeably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.