Panasonic
Panasonic PT-TW230U projector lamp 230W 4000 hrs
Replacement projector lamp module with a 230W bulb rated for 4,000 hours of use
- TypeProjector Lamp
- Wattage230W
- Lamp Life4,000 Hrs.
- Ready to install with pre-assembled housing
- 230 W Ushio NSH lamp delivers rated brightness
- 4,000-hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- Direct OEM bulb from Ushio, Philips, Osram or Phoenix
Panasonic PT-TW230U Replacement Lamp
This 230-watt projector lamp module ships as a complete housing assembly for compatible Panasonic projectors. It uses a new Ushio NSH bulb rated for 4,000 hours of operation. The unit arrives ready to install without additional assembly steps.
Suitable for owners needing a direct OEM-spec
Buyers who require a different wattage or a bare bulb without housing should look elsewhere. This module matches the original POA-LMP141 form factor and is not intended for non-Panasonic models or modified light engines.
Simple swap-in installation for most users
The pre-assembled housing eliminates bulb-alignment hassles, but the projector’s lamp-hour counter must be reset manually after fitting. Forcing the module into an incompatible chassis can damage the connector or crack the housing.
Highlights
- Ready to install with pre-assembled housing
- 230 W Ushio NSH lamp delivers rated brightness
- 4,000-hour rated life reduces replacement frequency
- Manufactured to ISO 9001 quality standards
- Direct OEM bulb from Ushio, Philips, Osram or Phoenix
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 230W |
| Lamp Life | 4,000 Hrs. |
Questions about this item
Which Panasonic projector models accept the POA-LMP141 lamp module?
The POA-LMP141 module is built for the PT-TW230U projector; verify your projector matches that model before ordering.
Can I keep using my existing ceiling mount and cables when I swap in this 230 W lamp?
Yes, the lamp fits the original housing so the projector, mount and cables stay unchanged; only the lamp module is replaced.
How do I confirm the new lamp is running correctly after installation?
Reset the lamp timer in the projector menu, then check that the timer starts from zero and the image reaches full brightness without error warnings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



