Panasonic
Panasonic PT-LB56U projector lamp ET-LAB80 220W
A 220W replacement lamp module with a 2,000 to 3,000-hour life for Panasonic projectors
- TypeProjector Lamp
- Wattage220W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- Bright 220W UHM lamp for clear projection
- Up to 3000 hours life in economy mode
- 2000 hours normal operation before replacement
- Manufactured to ISO 9001 quality standards
Ready-to-install lamp module
The Panasonic PT-LB56U lamp module combines a new Philips UHM 220W bulb with its housing in a single unit. It matches the ET-LAB80 specification and fits directly into compatible Panasonic projectors without extra assembly. Installation is straightforward because the bulb is already seated in the frame.
Rated output and service life
The lamp operates at 220W and delivers 2000 hours in normal mode or 3000 hours in economy mode. This wattage and life rating are the primary figures that determine whether the module matches the projector's original design. Buyers should confirm their projector specifies a 220W lamp before ordering.
Suits owners of compatible Panasonic projectors
This module suits anyone whose projector calls for the PT-LB56U or ET-LAB80 part and who wants a complete housing for quick replacement. It is not for users whose projector requires a different wattage or lamp code, nor for those who only need the bare bulb without the housing.
Highlights
- Ready to install with pre-assembled bulb and housing
- Bright 220W UHM lamp for clear projection
- Up to 3000 hours life in economy mode
- 2000 hours normal operation before replacement
- Manufactured to ISO 9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 220W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What does the 220W rating mean for brightness and heat in my projector?
The 220W Philips UHM bulb delivers the original light output for the PT-LB56U; expect the same lumen level and thermal load as the factory lamp.
How does the ET-LAB80 module connect and what does that limit?
It plugs directly into the projector’s proprietary lamp socket; the interface is fixed by the chassis, so there is no alternative connection or upgrade path.
Will the assembled housing fit the PT-LB56U without modification?
Yes, the ET-LAB80 housing matches the OEM dimensions and mounting tabs for a direct, tool-free swap in the PT-LB56U.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



