Panasonic
Panasonic PT-LB10NT OEM Osram Projector Lamp 155W 2000 Hrs
A ready-to-install replacement lamp module with a 155W Osram UHM bulb rated for 2,000 hours
- TypeProjector Lamp
- Wattage155W
- Lamp Life2,000 Hrs.
- Ready-to-install module with new Osram UHM 155W bulb and housing
- 2,000 hours rated lamp life for extended use
- OEM component manufactured to ISO 9001 quality standards
- Supplied as fully assembled bulb and housing unit
- Compatible replacement for Panasonic PT-LB10NT projector models
Panasonic Projector Lamp 155W 2000 Hrs
This Panasonic PT-LB10NT OEM replacement lamp uses a new Osram UHM 155W bulb inside a complete housing. It is rated for 2000 hours of operation and arrives ready for immediate installation in compatible Panasonic projectors.
For owners needing a direct OEM module
Suits users who want a factory-specification lamp with the original bulb technology and housing. Not for buyers who want a bare bulb without housing or who need a different wattage or lamp life than 155W and 2000 hours.
Easy housing swap with no alignment needed
The fully assembled module slides into the projector and locks without separate bulb handling. Common issues occur if the old housing is not fully removed or if the lamp timer is not reset after fitting the new unit.
Highlights
- Ready-to-install module with new Osram UHM 155W bulb and housing
- 2,000 hours rated lamp life for extended use
- OEM component manufactured to ISO 9001 quality standards
- Supplied as fully assembled bulb and housing unit
- Compatible replacement for Panasonic PT-LB10NT projector models
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 155W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Panasonic projectors accept the PT-LB10NT lamp module with the 155W Osram UHM bulb?
The PT-LB10NT is designed as a direct replacement for Panasonic projectors that use the ET-LAB10 lamp code. Check your projector's manual or current lamp label for ET-LAB10 to confirm compatibility before ordering.
Can I reuse the existing lamp housing from my old ET-LAB10 lamp when installing this PT-LB10NT module?
No, this PT-LB10NT module arrives as a fully assembled unit with a new 155W Osram UHM bulb already mounted in a new housing. The complete assembly is replaced in one step; no separate housing reuse is required.
How do I verify the new PT-LB10NT lamp is operating correctly after installation?
Power on the projector and confirm a bright, stable image with no flickering. Then open the lamp timer in the projector menu and reset it to zero so the 2,000-hour rating tracks accurately from this installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



