Panasonic
Panasonic PT-LAB60E Projector Lamp 220W
A 220W replacement projector lamp module with 3,000 to 4,000 hours of rated life
- TypeProjector Lamp
- Wattage220W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine Philips UHM bulb delivers reliable brightness
- 220W power matches original projector specification
- 3,000 normal / 4,000 economy hours extends replacement interval
- Pre-assembled housing enables quick tool-free installation
- ISO 9001 manufacturing ensures consistent beam performance
Ready-to-install projector lamp
The Panasonic PT-LAB60E is a complete 220W lamp module with bulb and housing pre-assembled. It fits compatible Panasonic projectors without extra parts or tools. Buyers who need a bare bulb only or a different wattage should look elsewhere.
Replaces dim or expired original lamps
Swap it in when the existing lamp reaches the end of its rated 3000 hours in normal mode or 4000 hours in economy mode. The jump is worth it when brightness drops noticeably or the projector warns of lamp failure. Projectors that require a different lamp code cannot use this module.
Simple drop-in replacement
The unit ships fully assembled so installation means opening the lamp door, removing the old module and sliding this one in. Most issues come from forgetting to reset the lamp timer or not seating the connector firmly. No wiring or alignment steps are required.
Highlights
- Genuine Philips UHM bulb delivers reliable brightness
- 220W power matches original projector specification
- 3,000 normal / 4,000 economy hours extends replacement interval
- Pre-assembled housing enables quick tool-free installation
- ISO 9001 manufacturing ensures consistent beam performance
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 220W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Will the PT-LAB60E lamp module fit directly into my Panasonic projector without extra brackets?
The lamp ships as a fully assembled 220W bulb and housing unit matching the Panasonic ET-LAB30 form factor, so it seats in the existing lamp compartment with no additional mounting hardware required.
What is the installation step users most often miss when replacing this lamp?
After inserting the module and securing the cover, the lamp-hour counter in the projector menu must be reset to zero; otherwise the projector will continue tracking the old lamp's hours and may shut down prematurely.
How many hours can I expect before the 220W UHM bulb needs replacing?
The lamp is rated for 3,000 hours in Normal mode or 4,000 hours in Economy mode; actual life varies with usage patterns, ambient temperature and power-cycle frequency.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



