Panasonic
Panasonic PT-FD400 OEM Compatible Dual Lamp 210W 3000 Hrs
Dual 210W UHM projector lamp modules with 3000-hour rated life for Panasonic PT-FD400
- TypeUHM (Dual Lamps)
- Wattage210W
- Lamp Life3,000 Hrs.
- Ready-to-install dual lamp modules
- 210W UHM bulbs deliver rated brightness
- 3,000-hour lamp life reduces replacements
- Manufactured to ISO 9001 quality standards
- Compatible with Panasonic PT-FD400 projectors
Dual 210W UHM lamps for PT-FD400
This new set contains two complete 210W UHM lamp modules with housings, matched to the Panasonic PT-FD400 projector. Each unit arrives fully assembled so the owner can swap the spent lamps without extra tools or alignment steps. The pair restores the projector to its original brightness specification for continued professional or educational use.
Replaces the factory ET-LAD40W modules
The dual lamps directly substitute the original Panasonic ET-LAD40W lamp pair when their 3000-hour rated life is reached. Swapping both units at the same time avoids the brightness mismatch that appears when only one lamp is changed. The upgrade is worth it when the projector shows dimming, colour shift or a lamp-warning message after extended daily operation.
Installs in the existing lamp bay
The modules seat in the projector’s original lamp compartment and draw the same 210W per lamp, so no electrical or cooling changes are required. Replacing the pair frees the operator from scheduling another shutdown for the second lamp and keeps maintenance intervals predictable. Compatibility is limited to the PT-FD400 series; other Panasonic models use different lamp codes.
Highlights
- Ready-to-install dual lamp modules
- 210W UHM bulbs deliver rated brightness
- 3,000-hour lamp life reduces replacements
- Manufactured to ISO 9001 quality standards
- Compatible with Panasonic PT-FD400 projectors
Specifications
| Brand | Panasonic |
|---|---|
| Type | UHM (Dual Lamps) |
| Wattage | 210W |
| Lamp Life | 3,000 Hrs. |
Questions about this item
What housing does the PT-FD400 dual lamp set use for installation?
Each 210W lamp arrives as a fully assembled bulb and housing module, ready to slide into the projector without separate assembly.
Which step is often missed when fitting the ET-LAD40W modules?
After inserting both lamps, the projector’s lamp-hour counter must be reset through the menu so the 3000-hour rating tracks correctly.
When should the UHM dual lamps be replaced?
Plan replacement around 3000 hours of use; the projector will also show a warning when the rated life is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



