We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Panasonic PT-F300NTU projector lamp module in black housing

Panasonic

Panasonic PT-F300NTU projector lamp 200W 2000 hrs

SKU CH-KXJJ-PMX1K

A Panasonic-branded OEM replacement lamp with a Philips UHM 200 W bulb in a ready-to-install housing, rated for 2 000 hours

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module saves setup time
  • 200 W UHM bulb matches original brightness
  • 2,000-hour rated life reduces replacement frequency
  • Built to ISO 9001 quality standards for reliability
  • Genuine OEM components ensure projector compatibility

Panasonic PT-F300NTU replacement lamp module

This replacement lamp module fits Panasonic projectors using the PT-F300NTU designation. It ships as a complete assembly with a 200W UHM bulb already mounted in its housing. The unit is intended for technicians or venue operators who need a direct swap without handling a bare bulb. Buyers who need a different wattage or a bare bulb only should look elsewhere.

Practical limits of the 200W UHM lamp

The lamp is rated for 2000 hours of typical operation before brightness drops to half its initial output. Running the projector in eco mode can extend usable life, while constant high-brightness use will shorten it. The 200W power draw also defines the minimum cooling capacity the projector must provide. Users who need longer rated life or lower power consumption cannot meet those needs with this module.

Tool-free installation and common pitfalls

The pre-assembled housing slides into the projector's lamp bay and locks without tools. Installation usually takes under a minute once the access cover is removed. The most frequent issue is forgetting to reset the projector's lamp-hour counter after fitting the new module, which leaves the replacement warning active. Another common error is touching the bulb glass with bare fingers, leaving residue that can cause hot spots and premature failure.

Highlights

  • Ready-to-install module saves setup time
  • 200 W UHM bulb matches original brightness
  • 2,000-hour rated life reduces replacement frequency
  • Built to ISO 9001 quality standards for reliability
  • Genuine OEM components ensure projector compatibility

Specifications

TypeProjector Lamp
Wattage200W
Lamp Life2,000 Hrs.

Questions about this item

Which PT-F300NTU lamp version should I choose among the OEM and compatible options?

Three OEM versions use genuine Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita bulbs; the compatible version uses OEM parts from a leading third-party maker. All meet ISO 9001 checks for beam performance, ignition, voltage, appearance, connections and run-time.

What does the 200 W rating mean once the lamp is installed in my projector?

The 200 W Philips UHM bulb draws 200 watts in operation, delivering the brightness and colour performance the projector was designed for at that power level.

What interface or standard governs the 2,000-hour lamp-life figure in practice?

The 2,000-hour rating follows the manufacturer’s standard measurement method for UHM lamps under typical operating conditions; actual hours vary with usage patterns, eco-mode settings and ambient temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.