Panasonic
Panasonic PT-EX800Z projector lamp 400W
A 400W replacement lamp module with a Philips UHM bulb and housing, rated for 3,000 hours normal or 4,500 hours economy use
- TypeProjector Lamp
- Wattage400W
- Lamp Life3,000 Hrs.(Normal) - 4,500 Hrs. (Economy)
- 400W UHM lamp delivers bright, consistent projection
- 3,000 hours normal life reduces replacement frequency
- 4,500 hours economy mode extends usable runtime
- Supplied as complete module for quick, tool-free installation
- Manufactured to ISO 9001 standards for reliable performance
Replacement lamp for Panasonic PT-EX800Z
This new lamp module includes a 400W Philips UHM bulb pre-installed in its housing, matching the original ET-LAE300 specification. It is built for technicians or owners who need a direct swap without separate bulb handling. Each unit is tested for ignition, voltage and run-time before dispatch.
Suitable for standard and economy modes
The lamp delivers 3000 hours in normal mode and 4500 hours in economy mode, covering typical classroom or meeting-room schedules. Buyers who need longer intervals between replacements or who run projectors continuously for critical signage should evaluate alternative solutions. Compatibility is limited to the PT-EX800Z series.
400W UHM bulb specification
The 400-watt ultra-high-mercury bulb determines brightness, heat output and the rated service life quoted above. Confirm that the projector model accepts this exact wattage before ordering, as mismatched power will cause premature failure or safety hazards.
Highlights
- 400W UHM lamp delivers bright, consistent projection
- 3,000 hours normal life reduces replacement frequency
- 4,500 hours economy mode extends usable runtime
- Supplied as complete module for quick, tool-free installation
- Manufactured to ISO 9001 standards for reliable performance
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 400W |
| Lamp Life | 3,000 Hrs.(Normal) - 4,500 Hrs. (Economy) |
Questions about this item
How do I install the ET-LAE300 lamp module in my Panasonic projector?
The lamp arrives as a fully assembled 400W bulb and housing. Power off the projector, let it cool, remove the lamp cover, unscrew the old module, slide the new unit in until the connector seats firmly, replace the screws and cover, then reset the lamp timer in the menu.
When will I need to replace the Philips UHM 400W bulb again?
Expect about 3000 hours in Normal mode or 4500 hours in Economy mode before brightness drops to half. The projector will warn you when the timer approaches the limit, so plan a replacement lamp at that point.
What is the first limit I hit during long presentations with this 400W lamp?
The 400W UHM bulb generates significant heat; after several continuous hours the projector’s thermal protection may dim the image or shut down until the unit cools, so schedule breaks or use Economy mode to extend run time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



