Panasonic
Panasonic PT-EX510 Projector Lamp 400W
400 W replacement lamp module with Ushio UHM bulb and housing, rated 3,000 hours normal or 4,500 hours economy for Panasonic PT-EX510 projectors
- TypeProjector Lamp
- Wattage400W
- Lamp Life3,000 Hrs.(Normal) - 4,500 Hrs. (Economy)
- Genuine Ushio 400W bulb for reliable brightness
- 3,000 hours normal lamp life extends replacement intervals
- 4,500 hours economy mode reduces operating cost
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards for consistent performance
Replacement Lamp for PT-EX510 Projectors
This new 400W lamp module ships as a fully assembled bulb and housing, so it fits straight into compatible Panasonic projectors without extra assembly. It is built for users who need a direct replacement for the original ET-LAE300 part and want the unit ready to install immediately.
Thermal and Power Characteristics
The lamp draws 400W during operation, a figure that determines both the projector's power demand and the heat the cooling system must handle. In normal mode the rated life is 3,000 hours, while switching to economy mode extends the rating to 4,500 hours, lowering both thermal load and fan noise for longer sessions.
Rated Lamp Life Decides Suitability
Buyers who need more than 4,500 hours between changes should look at projectors that accept higher-life modules, because this lamp tops out at that figure even in economy mode. The 400W rating also means the projector's power supply and cooling must be designed for that specific wattage.
Highlights
- Genuine Ushio 400W bulb for reliable brightness
- 3,000 hours normal lamp life extends replacement intervals
- 4,500 hours economy mode reduces operating cost
- Pre-assembled housing enables quick tool-free installation
- Manufactured to ISO 9001 quality standards for consistent performance
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 400W |
| Lamp Life | 3,000 Hrs.(Normal) - 4,500 Hrs. (Economy) |
Questions about this item
How do I install the ET-LAE300 lamp module into my PT-EX510 projector and what step is often missed?
Power off and unplug the projector, wait for it to cool, remove the lamp cover, loosen the retaining screws, slide the old module out, insert the new ET-LAE300 assembly until it seats firmly, tighten the screws, replace the cover, then reset the lamp timer in the menu so the 3000-hour counter starts correctly.
What maintenance or replacement will this 400W UHM lamp need after extended use?
The lamp itself is the only consumable; after 3000 hours in normal mode or 4500 hours in economy mode brightness drops and the projector will indicate replacement, at which point you purchase a new ET-LAE300 module and repeat the installation steps.
What limit appears first during sustained operation of this 400W lamp?
The rated lamp life is the first hard limit — 3000 hours at normal brightness or 4500 hours in economy mode — after which light output falls below specification and the projector prompts for a new lamp module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



