Panasonic
Panasonic PT-DZ570E OEM Replacement Projector Lamp 310W Ushio UHM Dual Lamps
A 310 W replacement lamp module with dual Ushio UHM bulbs, rated for 2,000 hours normal or 4,000 hours economy use
- TypeProjector Lamp
- Wattage310W
- Lamp Life2,000 (Normal) - 4,000 (Economy) Hrs.
- OEM-ready module installs instantly in PT-DZ570E projectors
- Ushio UHM dual-lamp design delivers consistent brightness
- 310 W power rating matches original specification
- 2 000 hours normal mode extends replacement interval
- 4 000 hours economy mode lowers operating cost
Panasonic PT-DZ570E Replacement Lamp
This replacement lamp module fits the Panasonic PT-DZ570E projector. It ships as a fully assembled bulb and housing for direct installation. The unit suits venues needing reliable projection uptime. It is not for buyers who need a bare bulb without the housing.
310W Ushio UHM Dual Lamp Specification
The lamp operates at 310W using a Ushio UHM dual-lamp design. Rated life reaches 2,000 hours in normal mode and 4,000 hours in economy mode. This wattage and lamp life determine compatibility and replacement planning. It is not for projectors requiring a different wattage or single-lamp format.
Thermal And Power Characteristics
At 310W the lamp draws a steady high current during operation. Expect noticeable heat output and fan noise typical for this power class in normal use. Economy mode reduces brightness to extend the lamp to 4,000 hours while lowering thermal load. It is not for silent or low-heat environments.
Highlights
- OEM-ready module installs instantly in PT-DZ570E projectors
- Ushio UHM dual-lamp design delivers consistent brightness
- 310 W power rating matches original specification
- 2 000 hours normal mode extends replacement interval
- 4 000 hours economy mode lowers operating cost
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 310W |
| Lamp Life | 2,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
How bright will the 310 W lamp be in my PT-DZ570E projector?
The 310 W Ushio UHM dual-lamp module restores the projector's original brightness specification because it matches the factory wattage and optical design.
Does the lamp use a proprietary connector or a standard lamp interface?
The module ships as a complete bulb-and-housing assembly keyed for the PT-DZ570E, so it plugs directly into the projector's dedicated lamp socket without adapters.
Will this replacement lamp fit inside the PT-DZ570E without modifications?
Yes, the assembled housing matches the OEM ET-LAD60AW form factor, so it slides into the existing lamp compartment and secures with the original latch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



