We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Panasonic PT-AT6000E projector lamp module ET-LAA410 with 220W bulb in housing

Panasonic

Panasonic PT-AT6000E projector lamp ET-LAA410 220W

SKU CH-T9M0-7PPTJ

Genuine 220W replacement lamp module with housing for Panasonic PT-AT6000E projectors, rated 4000 to 5000 hours

  • TypeProjector Lamp
  • Wattage220W
  • Lamp Life4,000 (Normal) - 5,000 (Economy) Hrs.
  • Genuine compatible replacement for Panasonic PT-AT6000E projectors
  • 220W UHM bulb delivers reliable brightness
  • Ready-to-install module with bulb and housing assembled
  • 4000 hours normal or 5000 hours economy lamp life
  • Manufactured to ISO 9001 quality standards

Replacement lamp for PT-AT6000E

The ET-LAA410 is a genuine compatible replacement lamp module designed for the Panasonic PT-AT6000E projector. It arrives fully assembled with a new 220W UHM bulb inside its housing, removing the need for separate bulb handling during installation. This unit suits owners who need a direct swap to restore original brightness. It is not for users whose projector requires a different wattage or lamp form factor.

Thermal output and 220W draw

The 220W UHM bulb determines the heat and power profile during normal operation. Running the projector in Economy mode reduces the load on the lamp, extending its usable life while lowering fan noise and thermal output compared with Normal mode. The module is built to ISO9001 quality standards, with each unit checked for ignition reliability and stable voltage performance. Buyers who need a lower-wattage lamp for a smaller projector cannot use this model.

Ready-to-fit housing and 4,000-hour rating

Because the bulb ships pre-mounted in its housing, installation requires no tools beyond opening the projector lamp door. The lamp is rated for 4,000 hours in Normal mode and up to 5,000 hours in Economy mode, giving a clear interval for planning the next replacement. The supplier offers a 90-day warranty and 30-day return window on the module. Projectors that accept only bare bulbs without a housing cannot use this assembly.

Highlights

  • Genuine compatible replacement for Panasonic PT-AT6000E projectors
  • 220W UHM bulb delivers reliable brightness
  • Ready-to-install module with bulb and housing assembled
  • 4000 hours normal or 5000 hours economy lamp life
  • Manufactured to ISO 9001 quality standards

Specifications

TypeProjector Lamp
Wattage220W
Lamp Life4,000 (Normal) - 5,000 (Economy) Hrs.

Questions about this item

How do I install the ET-LAA410 lamp module in the PT-AT6000E projector, and which step is often missed?

Power off and unplug the projector, let it cool completely, remove the lamp cover, loosen the securing screws, pull out the old module, insert the new housing until it clicks, retighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the common error.

What maintenance or replacement will the ET-LAA410 require after its rated hours?

The UHM 220W bulb is rated for 4,000 hours in Normal mode or 5,000 hours in Economy mode; once that limit is reached the entire lamp module must be replaced, and the air filters should be cleaned regularly to maintain airflow.

What limit appears first during sustained use of the ET-LAA410 lamp?

The 220W UHM bulb reaches its rated life of 4,000 hours in Normal mode or 5,000 hours in Economy mode before any other component, so lamp replacement becomes necessary at that point.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.