Panasonic
Panasonic ET-SLMP66 OEM Osram Projector Lamp 150W 2000 Hrs
Ready-to-install 150 W projector lamp module delivers 2,000 hours of brightness
- TypeProjector Lamp
- Wattage150W
- Lamp Life2,000 Hrs.
- Ready-to-install module speeds up replacement
- 150W Osram UHP bulb delivers specified brightness
- 2000-hour rated life supports extended use
- Manufactured to ISO9001 quality standards
- Genuine OEM component ensures projector compatibility
Panasonic ET-SLMP66 OEM Projector Lamp
The Panasonic ET-SLMP66 is a new 150W OEM replacement lamp module that includes a pre-assembled Osram UHP bulb and housing. It matches the Sanyo POA-LMP66 specification and is manufactured to ISO9001 standards for reliable ignition, voltage stability and beam performance. Installation is straightforward because the bulb and housing arrive fully assembled.
Suitable for Sanyo projectors needing a direct-fit
This lamp suits owners of compatible Sanyo projectors who want a factory-matched 150W UHP replacement with a 2,000-hour rated life. It is not intended for projectors that require a different wattage, a bare bulb without housing, or a non-OEM compatible unit when an original manufacturer module is specified.
150W UHP output rated for 2,000 hours of use
The 150W UHP bulb delivers brightness and colour stability for the full 2,000-hour rating under normal operating conditions. Light output will gradually decline as the lamp approaches its rated limit, and the module must be replaced once the rated hours are exceeded to maintain image quality.
Highlights
- Ready-to-install module speeds up replacement
- 150W Osram UHP bulb delivers specified brightness
- 2000-hour rated life supports extended use
- Manufactured to ISO9001 quality standards
- Genuine OEM component ensures projector compatibility
Specifications
| Brand | Sanyo |
|---|---|
| Type | Projector Lamp |
| Wattage | 150W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Sanyo projectors accept the POA-LMP66 lamp module?
The ET-SLMP66 is built to the POA-LMP66 specification, so it fits any Sanyo projector that lists POA-LMP66 as its replacement lamp part number.
Will the 150W UHP bulb run on the same ballast as my original lamp?
Yes, the 150W rating matches the original specification, so the existing projector ballast will drive the Osram bulb without modification.
How can I confirm the new lamp is delivering the rated 2000 hours of life?
Reset the projector's lamp-hour counter after installation; the counter will then track usage toward the 2000-hour rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



